From bboyce at swat.coop  Tue Nov  4 07:26:02 2014
From: bboyce at swat.coop (bill boyce)
Date: Tue, 4 Nov 2014 09:26:02 -0600
Subject: [SEL] 40 hp Y
Message-ID: <4E086C682AA94DB99AD2019C8E0388D6@billPC>

a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
appreciated.

bill boyce

From rotigel at me.com  Tue Nov  4 07:51:37 2014
From: rotigel at me.com (David Rotigel)
Date: Tue, 04 Nov 2014 10:51:37 -0500
Subject: [SEL] 40 hp Y
In-Reply-To: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
References: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
Message-ID: <5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>

ATF would not be a bad choice.
	Dave

On Nov 4, 2014, at 10:26 AM, bill boyce <bboyce at swat.coop> wrote:

> a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
> top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
> thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
> appreciated.
> 
> bill boyce
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From rholtzer at earthlink.net  Tue Nov  4 08:40:28 2014
From: rholtzer at earthlink.net (Robert)
Date: Tue, 04 Nov 2014 08:40:28 -0800
Subject: [SEL] 40 hp Y
In-Reply-To: <5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>
References: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
	<5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>
Message-ID: <5459017C.6000808@earthlink.net>

I've used Rislone for this purpose.  Seems to work well.  Let it soak 
overnight.

R. Holtzer

On 11/4/2014 7:51 AM, David Rotigel wrote:
> ATF would not be a bad choice.
> 	Dave
>
> On Nov 4, 2014, at 10:26 AM, bill boyce <bboyce at swat.coop> wrote:
>
>> a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
>> top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every
>> thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
>> appreciated.
>>
>> bill boyce
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>



From cgandree at mchsi.com  Wed Nov  5 03:15:45 2014
From: cgandree at mchsi.com (cgandree at mchsi.com)
Date: Wed, 5 Nov 2014 05:15:45 -0600 (CST)
Subject: [SEL] 40 hp Y
In-Reply-To: <2040542635.24781561415186016394.JavaMail.root@dsmdc-mail-mbs11>
Message-ID: <2015904256.24781581415186145364.JavaMail.root@dsmdc-mail-mbs11>

Bill,
Give Gibbs penetrating oil spray a chance. I ve unsized most of the stuck pistons on all my restored engines for many years plus it will eat rusted nuts and bolts quickly. One can runs around $12 but worth every penny. Plus it will not freeze nor easily catch fire if you use a torch. It is advertised in GEM.

A question for you. My club the Stephenson County Antique Engine Club in Freeport Illinois owns a 30hp model Y Fairbanks engine which is displayed in our club building. I ve helped maintain and run it for many years and the original radiator which has been repaired many times is leaking. Do you know of a source for a new one?
Thank you,
Curt Andree


----- Original Message -----
From: "bill boyce" <bboyce at swat.coop>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, November 4, 2014 9:26:02 AM GMT -06:00 US/Canada Central
Subject: [SEL] 40 hp Y

a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
appreciated.

bill boyce
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From rotigel at me.com  Thu Nov  6 05:57:46 2014
From: rotigel at me.com (David Rotigel)
Date: Thu, 06 Nov 2014 08:57:46 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
Message-ID: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>

??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh

From rob at rustyiron.com  Thu Nov  6 08:17:53 2014
From: rob at rustyiron.com (Rob Skinner)
Date: Thu, 6 Nov 2014 08:17:53 -0800
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
Message-ID: <6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
> 
> ??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.  
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back. 
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob






From mr at carolina.rr.com  Thu Nov  6 15:37:55 2014
From: mr at carolina.rr.com (Mike Royster)
Date: Thu, 6 Nov 2014 18:37:55 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
	<6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>
Message-ID: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>

Cool


-----Original Message----- 
From: Rob Skinner
Sent: Thursday, November 06, 2014 11:17 AM
To: SEL ATIS
Subject: Re: [SEL] Probably Worth Printing??


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>
> ??and/or saving. See: 
> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back.
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob




_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



From rustaholic777 at yahoo.com  Thu Nov  6 16:57:14 2014
From: rustaholic777 at yahoo.com (Alan)
Date: Fri, 7 Nov 2014 00:57:14 +0000 (UTC)
Subject: [SEL] =?utf-8?b?UHJvYmFibHkgV29ydGggUHJpbnRpbmfigKbigKY=?=
In-Reply-To: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
Message-ID: <1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>

So I should throw away my three belt lacers and all those supplies I bought so cheaply?No I will not but when I need a belt for my own use from now on I will lace it this way.Thank you Dave for that link and you too Rob for the nice article.Alan in Michigan
      From: Mike Royster <mr at carolina.rr.com>
 To: The SEL email discussion list <sel at lists.stationary-engine.com> 
 Sent: Thursday, November 6, 2014 6:37 PM
 Subject: Re: [SEL] Probably Worth Printing??
   
Cool


-----Original Message----- 
From: Rob Skinner
Sent: Thursday, November 06, 2014 11:17 AM
To: SEL ATIS
Subject: Re: [SEL] Probably Worth Printing??


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>
> ??and/or saving. See: 
> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back.
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob




_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

  

From ozengine at iinet.net.au  Thu Nov  6 19:01:37 2014
From: ozengine at iinet.net.au (Kerry)
Date: Fri, 07 Nov 2014 14:01:37 +1100
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
Message-ID: <545C3611.6080309@iinet.net.au>

Thanks Dave, will save this

Kerry



On 7/11/2014 12:57 AM, David Rotigel wrote:
> ??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel

-- 
Kerry Morris
Tangye Engine Registrar
0400421133
Web Page.   www.oldengine.org/members/kmorris/



From rotigel at me.com  Thu Nov  6 19:05:38 2014
From: rotigel at me.com (David Rotigel)
Date: Thu, 06 Nov 2014 22:05:38 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
	<1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
Message-ID: <56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>

I would agree 100% Alan. Those lacers are fine for other peoples belts, but for mine they will be hand laced from now on.
	Dave
PS, Now if I can find two more of those black phones with dials on them, I will have one for every room in my home!

On Nov 6, 2014, at 7:57 PM, Alan <rustaholic777 at yahoo.com> wrote:

> So I should throw away my three belt lacers and all those supplies I bought so cheaply?No I will not but when I need a belt for my own use from now on I will lace it this way.Thank you Dave for that link and you too Rob for the nice article.Alan in Michigan
>      From: Mike Royster <mr at carolina.rr.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com> 
> Sent: Thursday, November 6, 2014 6:37 PM
> Subject: Re: [SEL] Probably Worth Printing??
> 
> Cool
> 
> 
> -----Original Message----- 
> From: Rob Skinner
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
> 
> 
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>> 
>> ??and/or saving. See: 
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
> 
> 
> 
> Right on, Dave.
> Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
> Here?s an article that I did a while back.
> https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf
> 
> Rob
> 
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel 
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From mr at carolina.rr.com  Thu Nov  6 19:46:22 2014
From: mr at carolina.rr.com (Mike Royster)
Date: Thu, 6 Nov 2014 22:46:22 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC><1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
Message-ID: <DFC7B3969F464AD486C4747CB977DF81@RoysterPC>

Dave, I have one.  Call me at Huxley 44.

MR


-----Original Message----- 
From: David Rotigel
Sent: Thursday, November 06, 2014 10:05 PM
To: The SEL email discussion list
Subject: Re: [SEL] Probably Worth Printing??

I would agree 100% Alan. Those lacers are fine for other peoples belts, but 
for mine they will be hand laced from now on.
Dave
PS, Now if I can find two more of those black phones with dials on them, I 
will have one for every room in my home!

On Nov 6, 2014, at 7:57 PM, Alan <rustaholic777 at yahoo.com> wrote:

> So I should throw away my three belt lacers and all those supplies I 
> bought so cheaply?No I will not but when I need a belt for my own use from 
> now on I will lace it this way.Thank you Dave for that link and you too 
> Rob for the nice article.Alan in Michigan
>      From: Mike Royster <mr at carolina.rr.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com>
> Sent: Thursday, November 6, 2014 6:37 PM
> Subject: Re: [SEL] Probably Worth Printing??
>
> Cool
>
>
> -----Original Message----- 
> From: Rob Skinner
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
>
>
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>>
>> ??and/or saving. See:
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
>
>
>
> Right on, Dave.
> Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
> Here?s an article that I did a while back.
> https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf
>
> Rob
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



From frank at lbpinc.com  Fri Nov  7 05:42:05 2014
From: frank at lbpinc.com (Frank DeWitt)
Date: Fri, 07 Nov 2014 08:42:05 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC><1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
	<DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
Message-ID: <545CCC2D.8040601@lbpinc.com>

You just need one on a little table in the front hall.  No one needs a 
phone in every room
Frank

Dave PS, Now if I can find two more of those black phones with dials on 
them, I will have one for every room in my home! On Nov 6, 2014, at 7:57 
PM, Alan <rustaholic777 at yahoo.com> wrote:

-- 
--------------
HONOR GOD
SERVE PEOPLE
DEVELOP EXCELLENCE
GROW PROFITABLE
FOLLOWING BIBLICAL PRINCIPLES

    Frank DeWitt           |  mailto:frank at lbpinc.com
    Mechanical Design      |  Phone:  585 624 3052
    LBP  INC.              |
    2365 Cox Rd.           |
    Bloomfield NY 14469    |Web  http://www.lbpinc.com/



From rotigel at me.com  Fri Nov  7 09:16:07 2014
From: rotigel at me.com (David Rotigel)
Date: Fri, 07 Nov 2014 12:16:07 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <545CCC2D.8040601@lbpinc.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
	<1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
	<DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
	<545CCC2D.8040601@lbpinc.com>
Message-ID: <B6F8EEC8-6A23-4AD4-B930-3754C63CB183@me.com>

But what if you are on a party line and one of the phones is busy?
	Dave

On Nov 7, 2014, at 8:42 AM, Frank DeWitt <frank at lbpinc.com> wrote:

> You just need one on a little table in the front hall.  No one needs a 
> phone in every room
> Frank
> 
> Dave PS, Now if I can find two more of those black phones with dials on 
> them, I will have one for every room in my home! On Nov 6, 2014, at 7:57 
> PM, Alan <rustaholic777 at yahoo.com> wrote:
> 
> -- 
> --------------
> HONOR GOD
> SERVE PEOPLE
> DEVELOP EXCELLENCE
> GROW PROFITABLE
> FOLLOWING BIBLICAL PRINCIPLES
> 
>    Frank DeWitt           |  mailto:frank at lbpinc.com
>    Mechanical Design      |  Phone:  585 624 3052
>    LBP  INC.              |
>    2365 Cox Rd.           |
>    Bloomfield NY 14469    |Web  http://www.lbpinc.com/
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel



From oldengine at comcast.net  Fri Nov  7 16:52:27 2014
From: oldengine at comcast.net (Harry)
Date: Fri, 07 Nov 2014 19:52:27 -0500
Subject: [SEL] http://www.old-engine.com/belts2.htm
In-Reply-To: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
References: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
Message-ID: <545D694B.2040600@comcast.net>

Posted in 2001. ;-) From an old original book.

http://www.old-engine.com/belts2.htm


On 11/7/2014 12:00 PM, sel-request at lists.stationary-engine.com wrote:
> -----Original Message-----
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
>
>
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>>
>> ??and/or saving. See:
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com



From djohn2 at bigpond.net.au  Fri Nov  7 17:40:30 2014
From: djohn2 at bigpond.net.au (derek)
Date: Sat, 8 Nov 2014 12:10:30 +1030
Subject: [SEL] Barn Fresh Aussie Auction
In-Reply-To: <545D694B.2040600@comcast.net>
References: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
	<545D694B.2040600@comcast.net>
Message-ID: <000001cffaf4$fb530540$f1f90fc0$@net.au>

http://www.elders.com.au/livestock/sales-classified-listings/plant-machinery
-clearing-sales/photos?id=2194

Nov 14th Paringa, 



From kosh at ncweb.com  Mon Nov 10 14:56:18 2014
From: kosh at ncweb.com (Dave Merchant)
Date: Mon, 10 Nov 2014 17:56:18 -0500
Subject: [SEL] test
Message-ID: <54614292.9080008@ncweb.com>

ISP changed stuff, no SEL mail in a while...

Dave Merchant



From randmingold at hotkey.net.au  Mon Nov 10 15:07:29 2014
From: randmingold at hotkey.net.au (Reg)
Date: Tue, 11 Nov 2014 10:07:29 +1100
Subject: [SEL] test
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <641DEADCCD6A438481A8DFC4288AD085@REGPC>

Quiet here too!
Reg

-----Original Message----- 
From: Dave Merchant 
Sent: Tuesday, November 11, 2014 9:56 AM 
To: sel at lists.stationary-engine.com 
Subject: [SEL] test 

ISP changed stuff, no SEL mail in a while...

Dave Merchant

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From mls477 at ntelos.net  Mon Nov 10 15:36:07 2014
From: mls477 at ntelos.net (Mark L Shattuck)
Date: Mon, 10 Nov 2014 18:36:07 -0500
Subject: [SEL] test
In-Reply-To: <641DEADCCD6A438481A8DFC4288AD085@REGPC>
References: <54614292.9080008@ncweb.com>
	<641DEADCCD6A438481A8DFC4288AD085@REGPC>
Message-ID: <54614BE7.6020706@ntelos.net>

Its Also Quiet here, Only the bears are chasing the deer around .
                                        Mark Shattuck
                                         Waynesboro Va
On 11/10/2014 6:07 PM, Reg wrote:
> Quiet here too!
> Reg
>
> -----Original Message-----
> From: Dave Merchant
> Sent: Tuesday, November 11, 2014 9:56 AM
> To: sel at lists.stationary-engine.com
> Subject: [SEL] test
>
> ISP changed stuff, no SEL mail in a while...
>
> Dave Merchant
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>



From asouth42 at embarqmail.com  Tue Nov 11 11:38:49 2014
From: asouth42 at embarqmail.com (Arthur Southwell)
Date: Tue, 11 Nov 2014 14:38:49 -0500
Subject: [SEL] O.T. Veterans day
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <3030826DD84042839BF3D403630D9C38@ArthurHP1>


It's been said, excuses only satisfy those who make them: so, here's mine! 
I'm late in the day with a Thank You veterans for you service because I was 
preparing for the local Veterans Day Parade by posting 6 service flags 
around the U.S. Flag, POW/MIA flag, and making ready a float for the 
disabled veterans to ride on and marching in then parade with the American 
Legion Honor Guard.

To all my brothers and sisters in arms and those serving active today:

THANK YOU FOR YOUR SERVICE!

Arthur Southwell
Arcadia, FL 



From jlb941 at verizon.net  Tue Nov 11 18:55:21 2014
From: jlb941 at verizon.net (jlb941 at verizon.net)
Date: Tue, 11 Nov 2014 20:55:21 -0600 (CST)
Subject: [SEL] O.T. Veterans day
Message-ID: <8143948.3073739.1415760921660.JavaMail.root@vms170033>

   Thanks Art,
   Sounds like you more than remembered.



   Joe "Pip" Betz said that.
     ,-._,-,     [1]jlb941 at verizon.net
   [2]www.oldengine.org/members/betz
     \/)"(\/        If there are no dogs in heaven, when I die, I want to
   go where they went.
    (_0_)                      In memory of Bre-Dog




   On 11/11/14, Arthur Southwell<asouth42 at embarqmail.com> wrote:

   It's been said, excuses only satisfy those who make them: so, here's
   mine!
   I'm late in the day with a Thank You veterans for you service because I
   was
   preparing for the local Veterans Day Parade by posting 6 service flags
   around the U.S. Flag, POW/MIA flag, and making ready a float for the
   disabled veterans to ride on and marching in then parade with the
   American
   Legion Honor Guard.
   To all my brothers and sisters in arms and those serving active today:
   THANK YOU FOR YOUR SERVICE!
   Arthur Southwell
   Arcadia, FL
   _______________________________________________
   SEL mailing list
   [3]SEL at lists.stationary-engine.com
   [4]http://www.stationary-engine.com/mailman/listinfo/sel

References

   1. mailto:jlb941 at verizon.net
   2. http://www.oldengine.org/members/betz
   3. mailto:SEL at lists.stationary-engine.com
   4. http://www.stationary-engine.com/mailman/listinfo/sel


From maytagtwin at aol.com  Tue Nov 11 22:51:36 2014
From: maytagtwin at aol.com (maytagtwin@aol.com,)
Date: Wed, 12 Nov 2014 01:51:36 -0500
Subject: [SEL] test
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <8D1CC5C3D273602-F70-F574@webmail-va111.sysops.aol.com>


Hi Dave,
You reached me here in Missouri via SEL.
 
Ron Carroll
 
 
-----Original Message-----
From: Dave Merchant <kosh at ncweb.com>
To: sel <sel at lists.stationary-engine.com>
Sent: Mon, Nov 10, 2014 4:59 pm
Subject: [SEL] test


ISP changed stuff, no SEL mail in a while...

Dave Merchant

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

 


From patrick.livingstone at gmail.com  Wed Nov 19 03:08:42 2014
From: patrick.livingstone at gmail.com (Patrick Livingstone)
Date: Wed, 19 Nov 2014 22:08:42 +1100
Subject: [SEL] Coolspring 2015
Message-ID: <D092C56A.6EDA%patrick.livingstone@gmail.com>

My flights are booked and I will be winging my way over to the USA for the
Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
meet up with quite a few list members there :)
Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html





From ron217_2000 at yahoo.com  Wed Nov 19 03:29:39 2014
From: ron217_2000 at yahoo.com (Ron Frost)
Date: Wed, 19 Nov 2014 11:29:39 +0000 (UTC)
Subject: [SEL] Coolspring 2015
In-Reply-To: <D092C56A.6EDA%patrick.livingstone@gmail.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
Message-ID: <1888726379.2486259.1416396579232.JavaMail.yahoo@jws10670.mail.bf1.yahoo.com>

That will be great. Looking forward to meeting you. ??Ron Perma Frost ?

 ? ? 

     On Wednesday, November 19, 2014 6:22 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
   

 My flights are booked and I will be winging my way over to the USA for the
Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
meet up with quite a few list members there :)
Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From Jim at hardmanfamily.net  Wed Nov 19 04:22:14 2014
From: Jim at hardmanfamily.net (Jim Hardman)
Date: Wed, 19 Nov 2014 07:22:14 -0500
Subject: [SEL] More Steam than Gas
Message-ID: <2F57CCE48D1A4A129C1539641AFBD6BF@JamesDesktop>


Two quick items...

Patrick, it will be good to meet you at Coolspring.  It's a great show!

You didn't mention Samuel, your engineer-in-chief...  Perhaps in a couple years...

And two, my brother sends the following video.  More steam than IC, but I enjoyed it and pass it along.


https://www.youtube.com/watch?v=fZTtpn2Lodk 

And to everyone, Happy Thanksgiving!

Jim

From rotigel at me.com  Wed Nov 19 08:05:06 2014
From: rotigel at me.com (David Rotigel)
Date: Wed, 19 Nov 2014 11:05:06 -0500
Subject: [SEL] Coolspring 2015
In-Reply-To: <D092C56A.6EDA%patrick.livingstone@gmail.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
Message-ID: <8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>

As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
	Dave

On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:

> My flights are booked and I will be winging my way over to the USA for the
> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
> meet up with quite a few list members there :)
> Patrick
> 
> Patrick M Livingstone
> 0418 692013
> Earlwood NSW
> http://www.oldengine.org/members/pml/Index.html
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From 1oldengin at gmail.com  Thu Nov 20 06:17:32 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 09:17:32 -0500
Subject: [SEL] Flywheel
Message-ID: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>

I am looking for a flywheel 56-60 inches, any ideas.  Leroy


From jnyost at yahoo.com  Thu Nov 20 06:41:33 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Thu, 20 Nov 2014 09:41:33 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
Message-ID: <EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>

Can u use one that has a crack or u gonna need a good one?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Thu Nov 20 17:47:11 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 20:47:11 -0500
Subject: [SEL] Test
Message-ID: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>

New phone test Leroy


From 1oldengin at gmail.com  Thu Nov 20 17:55:46 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 20:55:46 -0500
Subject: [SEL] Flywheel
In-Reply-To: <EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
Message-ID: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>

At this time a cracked one is better than none.  Leroy
 Can u use one that has a crack or u gonna need a good one?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>
> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From randmingold at hotkey.net.au  Thu Nov 20 17:59:32 2014
From: randmingold at hotkey.net.au (Reg)
Date: Fri, 21 Nov 2014 12:59:32 +1100
Subject: [SEL] Test
In-Reply-To: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
References: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
Message-ID: <F63D2EF74C2E44C98673F0D3F8C63833@REGPC>

Yup!

-----Original Message----- 
From: Leroy Clark 
Sent: Friday, November 21, 2014 12:47 PM 
To: The SEL email discussion list 
Subject: [SEL] Test 

New phone test Leroy
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From jneth3 at mac.com  Thu Nov 20 19:13:12 2014
From: jneth3 at mac.com (John Neth)
Date: Thu, 20 Nov 2014 22:13:12 -0500
Subject: [SEL] Test
In-Reply-To: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
References: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
Message-ID: <C4CB90C9-B1A4-4618-B793-0A32B680AB4A@mac.com>

Came thru to Upper East Tennessee .

Sent from my iPhone

> On Nov 20, 2014, at 8:47 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> New phone test Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Fri Nov 21 03:46:55 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Fri, 21 Nov 2014 06:46:55 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
Message-ID: <CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>

Jim do you have a picture?
On Nov 20, 2014 8:55 PM, "Leroy Clark" <1oldengin at gmail.com> wrote:

> At this time a cracked one is better than none.  Leroy
>  Can u use one that has a crack or u gonna need a good one?
>
> Sent from my iPhone
> Jim
>
> > On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> >
> > I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


From jnyost at yahoo.com  Fri Nov 21 04:47:27 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Fri, 21 Nov 2014 07:47:27 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>
Message-ID: <FBC717BA-577A-4B37-8262-2FA91EB6D3EF@yahoo.com>

I was gonna chk on this end of the earth with a couple guys to see if they had any. I'll let ya know

Sent from my iPhone
Jim

> On Nov 21, 2014, at 6:46 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> Jim do you have a picture?
>> On Nov 20, 2014 8:55 PM, "Leroy Clark" <1oldengin at gmail.com> wrote:
>> 
>> At this time a cracked one is better than none.  Leroy
>> Can u use one that has a crack or u gonna need a good one?
>> 
>> Sent from my iPhone
>> Jim
>> 
>>> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>>> 
>>> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel



From russell at ncable.com.au  Fri Nov 21 16:05:02 2014
From: russell at ncable.com.au (Russell)
Date: Sat, 22 Nov 2014 11:05:02 +1100
Subject: [SEL] Coolspring 2015
In-Reply-To: <8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
	<8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
Message-ID: <4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>

Gday Dave, mate I have a leave pass and thinking about heading over again. Can you bring the bigger eski??

regards Russ


On 20/11/2014, at 3:05 AM, David Rotigel wrote:

> As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
> 	Dave
> 
> On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
> 
>> My flights are booked and I will be winging my way over to the USA for the
>> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
>> meet up with quite a few list members there :)
>> Patrick
>> 
>> Patrick M Livingstone
>> 0418 692013
>> Earlwood NSW
>> http://www.oldengine.org/members/pml/Index.html
>> 
>> 
>> 
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From rotigel at me.com  Fri Nov 21 16:18:26 2014
From: rotigel at me.com (David Rotigel)
Date: Fri, 21 Nov 2014 19:18:26 -0500
Subject: [SEL] Coolspring 2015
In-Reply-To: <4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
	<8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
	<4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>
Message-ID: <7F83DF38-6555-484C-B1A8-8A4E28F99801@me.com>

I think that can be arranged, Russ!
	Dave

On Nov 21, 2014, at 7:05 PM, Russell <russell at ncable.com.au> wrote:

> Gday Dave, mate I have a leave pass and thinking about heading over again. Can you bring the bigger eski??
> 
> regards Russ
> 
> 
> On 20/11/2014, at 3:05 AM, David Rotigel wrote:
> 
>> As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
>> 	Dave
>> 
>> On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
>> 
>>> My flights are booked and I will be winging my way over to the USA for the
>>> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
>>> meet up with quite a few list members there :)
>>> Patrick
>>> 
>>> Patrick M Livingstone
>>> 0418 692013
>>> Earlwood NSW
>>> http://www.oldengine.org/members/pml/Index.html
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>> 
>> 
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From jnyost at yahoo.com  Sat Nov 22 17:09:57 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Sat, 22 Nov 2014 20:09:57 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
Message-ID: <93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>

Leroy, I haven't heard bak from John if he has one. What ya using it for?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 8:55 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> At this time a cracked one is better than none.  Leroy
> Can u use one that has a crack or u gonna need a good one?
> 
> Sent from my iPhone
> Jim
> 
>> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>> 
>> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Sun Nov 23 13:06:00 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Sun, 23 Nov 2014 16:06:00 -0500
Subject: [SEL] Flywheel
In-Reply-To: <93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
Message-ID: <CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>

I bought a 15-20 hp oil city have not seen it but trust the seller no
wheels but every thing else is good.
 On Nov 22, 2014 8:13 PM, "Jim Yost" <jnyost at yahoo.com> wrote:

> Leroy, I haven't heard bak from John if he has one. What ya using it for?
>
> Sent from my iPhone
> Jim
>
> > On Nov 20, 2014, at 8:55 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> >
> > At this time a cracked one is better than none.  Leroy
> > Can u use one that has a crack or u gonna need a good one?
> >
> > Sent from my iPhone
> > Jim
> >
> >> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> >>
> >> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> >> _______________________________________________
> >> SEL mailing list
> >> SEL at lists.stationary-engine.com
> >> http://www.stationary-engine.com/mailman/listinfo/sel
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


From 1oldengin at gmail.com  Sun Nov 23 13:18:05 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Sun, 23 Nov 2014 16:18:05 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
	<CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>
Message-ID: <CA+B8urQksgxb+wG8XQkqjes+keAjPNEHhkeQT6QjR+oWY3JWPA@mail.gmail.com>

419.310.2557


From cgandree at mchsi.com  Sun Nov 30 04:55:39 2014
From: cgandree at mchsi.com (cgandree at mchsi.com)
Date: Sun, 30 Nov 2014 06:55:39 -0600 (CST)
Subject: [SEL] Fwd: An important message to all R&V engine owners from Peter
	Lowe
In-Reply-To: <c8176.56d75a6c.41ac6bec@aol.com>
Message-ID: <2074160766.1199651417352139692.JavaMail.root@dsmdc-mail-mbs11>

FYI.
For all you R&V collectors here is an important message from Peter Lowe about another planning of a great event.
I plan to be there, who else?
Curt Andree








----- Forwarded Message -----
From: Cgandree at aol.com
To: cgandree at mchsi.com
Sent: Sunday, November 30, 2014 6:47:40 AM GMT -06:00 US/Canada Central
Subject: Fwd: An important message to all R&V engine owners from Peter Lowe








From: plowe at exemail.com.au 
To: plowe at exemail.com.au 
Sent: 11/30/2014 4:29:14 A.M. Central Standard Time 
Subj: An important message to all R&V engine owners from Peter Lowe 



Hi all. 
Well, I have been contacted by the Geneseo IL AE&TA club that hosted the 2003 R&V Centenary Expo is relation to running another R&V Feature Show. 
The contact is Paul Searl and he runs the RockIslandPlowCo.com website http://www.rockislandplowco.com/ 
The earliest date would be Sept. 2016 possibly 2017. 
We would like to get all R&V Register Members to this show if the massive effort involved is to be under taken. I am prepared to travel 10,000Km if you guys are prepared to travel a few hundred miles. It would be a big feat to match the 2003 and the great 2010 shows, but R&V engines are a rarer breed and it would be great to get members together to compare and share. 
Any way, I have started the ball rolling, please come back with your thoughts. Paul can be contacted on 309-781-2896 but also please keep me in the loop. 

Regards 
Peter Lowe 
R&V Engine Registrar 
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm 


I was wondering who is in charge of the R&V Expo's, I figured you might know who to talk to? In 2003 the Geneseo IL AE&TA club hosted an expo, and a group of us have been talking about trying to have another. I don't think anyone who was directly involved in that one is still active in the club so we would be starting from scratch. The club had a bit of a bad run with the engine guys directly after 2003 show, and its taken til now to get some engine guys back really active in the club. The board is very interested in it and the current president is one of the main guys spearheading it. Time frame would be sept 2016 at the earliest (show is always second weekend after labor day so usually second full weekend of Sept for Fri-Sun). 2015 will be the National Rumely Expo, so that pushes us back to 2016 or 17. I doubt we would have more than a couple of engines from within the club unless we get a sudden influx, so success would come heavily from outside. The show grounds are actually closer to Moline IL now, and are easier to access, camping is limited right now in the show grounds but that may be fixed very soon, there is also a campground about a mile away and multiple hotels. Show space is virtually unlimited and if a tour was wanted again, the club could help arrange buses. The show is significantly larger than in 2003. I would probably be the main club contact at this point. the website is http://ae-ta.com/. 

Anyway, feel free to pass this along to whomever it should go to. my number is 309-781-2896. 

Paul Searl 



From bboyce at swat.coop  Tue Nov  4 07:26:02 2014
From: bboyce at swat.coop (bill boyce)
Date: Tue, 4 Nov 2014 09:26:02 -0600
Subject: [SEL] 40 hp Y
Message-ID: <4E086C682AA94DB99AD2019C8E0388D6@billPC>

a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
appreciated.

bill boyce

From rotigel at me.com  Tue Nov  4 07:51:37 2014
From: rotigel at me.com (David Rotigel)
Date: Tue, 04 Nov 2014 10:51:37 -0500
Subject: [SEL] 40 hp Y
In-Reply-To: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
References: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
Message-ID: <5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>

ATF would not be a bad choice.
	Dave

On Nov 4, 2014, at 10:26 AM, bill boyce <bboyce at swat.coop> wrote:

> a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
> top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
> thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
> appreciated.
> 
> bill boyce
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From rholtzer at earthlink.net  Tue Nov  4 08:40:28 2014
From: rholtzer at earthlink.net (Robert)
Date: Tue, 04 Nov 2014 08:40:28 -0800
Subject: [SEL] 40 hp Y
In-Reply-To: <5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>
References: <4E086C682AA94DB99AD2019C8E0388D6@billPC>
	<5CC2B504-34BC-4C43-A103-4F734E773AFF@me.com>
Message-ID: <5459017C.6000808@earthlink.net>

I've used Rislone for this purpose.  Seems to work well.  Let it soak 
overnight.

R. Holtzer

On 11/4/2014 7:51 AM, David Rotigel wrote:
> ATF would not be a bad choice.
> 	Dave
>
> On Nov 4, 2014, at 10:26 AM, bill boyce <bboyce at swat.coop> wrote:
>
>> a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
>> top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every
>> thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
>> appreciated.
>>
>> bill boyce
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>



From cgandree at mchsi.com  Wed Nov  5 03:15:45 2014
From: cgandree at mchsi.com (cgandree at mchsi.com)
Date: Wed, 5 Nov 2014 05:15:45 -0600 (CST)
Subject: [SEL] 40 hp Y
In-Reply-To: <2040542635.24781561415186016394.JavaMail.root@dsmdc-mail-mbs11>
Message-ID: <2015904256.24781581415186145364.JavaMail.root@dsmdc-mail-mbs11>

Bill,
Give Gibbs penetrating oil spray a chance. I ve unsized most of the stuck pistons on all my restored engines for many years plus it will eat rusted nuts and bolts quickly. One can runs around $12 but worth every penny. Plus it will not freeze nor easily catch fire if you use a torch. It is advertised in GEM.

A question for you. My club the Stephenson County Antique Engine Club in Freeport Illinois owns a 30hp model Y Fairbanks engine which is displayed in our club building. I ve helped maintain and run it for many years and the original radiator which has been repaired many times is leaking. Do you know of a source for a new one?
Thank you,
Curt Andree


----- Original Message -----
From: "bill boyce" <bboyce at swat.coop>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, November 4, 2014 9:26:02 AM GMT -06:00 US/Canada Central
Subject: [SEL] 40 hp Y

a 40 hp Y verticle fairbanks followed us home from an auction the other day, and after finding it low on compression, we discovered the
top ring is stuck. what is a good product to pour in the top that may disolve the gook/rust/whatever? the lower rings are free, and every 
thing else appears to be in order. i;ve seen this engine run in the past, but it set idle for about 3 years.,,,,    any ideas will be
appreciated.

bill boyce
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From rotigel at me.com  Thu Nov  6 05:57:46 2014
From: rotigel at me.com (David Rotigel)
Date: Thu, 06 Nov 2014 08:57:46 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
Message-ID: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>

??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh

From rob at rustyiron.com  Thu Nov  6 08:17:53 2014
From: rob at rustyiron.com (Rob Skinner)
Date: Thu, 6 Nov 2014 08:17:53 -0800
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
Message-ID: <6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
> 
> ??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.  
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back. 
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob






From mr at carolina.rr.com  Thu Nov  6 15:37:55 2014
From: mr at carolina.rr.com (Mike Royster)
Date: Thu, 6 Nov 2014 18:37:55 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
	<6E33E0B1-6F24-431E-9AE1-AC89DCAB7005@rustyiron.com>
Message-ID: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>

Cool


-----Original Message----- 
From: Rob Skinner
Sent: Thursday, November 06, 2014 11:17 AM
To: SEL ATIS
Subject: Re: [SEL] Probably Worth Printing??


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>
> ??and/or saving. See: 
> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back.
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob




_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



From rustaholic777 at yahoo.com  Thu Nov  6 16:57:14 2014
From: rustaholic777 at yahoo.com (Alan)
Date: Fri, 7 Nov 2014 00:57:14 +0000 (UTC)
Subject: [SEL] =?utf-8?b?UHJvYmFibHkgV29ydGggUHJpbnRpbmfigKbigKY=?=
In-Reply-To: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
Message-ID: <1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>

So I should throw away my three belt lacers and all those supplies I bought so cheaply?No I will not but when I need a belt for my own use from now on I will lace it this way.Thank you Dave for that link and you too Rob for the nice article.Alan in Michigan
      From: Mike Royster <mr at carolina.rr.com>
 To: The SEL email discussion list <sel at lists.stationary-engine.com> 
 Sent: Thursday, November 6, 2014 6:37 PM
 Subject: Re: [SEL] Probably Worth Printing??
   
Cool


-----Original Message----- 
From: Rob Skinner
Sent: Thursday, November 06, 2014 11:17 AM
To: SEL ATIS
Subject: Re: [SEL] Probably Worth Printing??


> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>
> ??and/or saving. See: 
> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh



Right on, Dave.
Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
Here?s an article that I did a while back.
https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf

Rob




_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

  

From ozengine at iinet.net.au  Thu Nov  6 19:01:37 2014
From: ozengine at iinet.net.au (Kerry)
Date: Fri, 07 Nov 2014 14:01:37 +1100
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
References: <67F51131-9DF4-4F14-8B1C-5F8C93E4D511@me.com>
Message-ID: <545C3611.6080309@iinet.net.au>

Thanks Dave, will save this

Kerry



On 7/11/2014 12:57 AM, David Rotigel wrote:
> ??and/or saving. See: http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel

-- 
Kerry Morris
Tangye Engine Registrar
0400421133
Web Page.   www.oldengine.org/members/kmorris/



From rotigel at me.com  Thu Nov  6 19:05:38 2014
From: rotigel at me.com (David Rotigel)
Date: Thu, 06 Nov 2014 22:05:38 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
	<1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
Message-ID: <56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>

I would agree 100% Alan. Those lacers are fine for other peoples belts, but for mine they will be hand laced from now on.
	Dave
PS, Now if I can find two more of those black phones with dials on them, I will have one for every room in my home!

On Nov 6, 2014, at 7:57 PM, Alan <rustaholic777 at yahoo.com> wrote:

> So I should throw away my three belt lacers and all those supplies I bought so cheaply?No I will not but when I need a belt for my own use from now on I will lace it this way.Thank you Dave for that link and you too Rob for the nice article.Alan in Michigan
>      From: Mike Royster <mr at carolina.rr.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com> 
> Sent: Thursday, November 6, 2014 6:37 PM
> Subject: Re: [SEL] Probably Worth Printing??
> 
> Cool
> 
> 
> -----Original Message----- 
> From: Rob Skinner
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
> 
> 
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>> 
>> ??and/or saving. See: 
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
> 
> 
> 
> Right on, Dave.
> Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
> Here?s an article that I did a while back.
> https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf
> 
> Rob
> 
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel 
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From mr at carolina.rr.com  Thu Nov  6 19:46:22 2014
From: mr at carolina.rr.com (Mike Royster)
Date: Thu, 6 Nov 2014 22:46:22 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC><1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
Message-ID: <DFC7B3969F464AD486C4747CB977DF81@RoysterPC>

Dave, I have one.  Call me at Huxley 44.

MR


-----Original Message----- 
From: David Rotigel
Sent: Thursday, November 06, 2014 10:05 PM
To: The SEL email discussion list
Subject: Re: [SEL] Probably Worth Printing??

I would agree 100% Alan. Those lacers are fine for other peoples belts, but 
for mine they will be hand laced from now on.
Dave
PS, Now if I can find two more of those black phones with dials on them, I 
will have one for every room in my home!

On Nov 6, 2014, at 7:57 PM, Alan <rustaholic777 at yahoo.com> wrote:

> So I should throw away my three belt lacers and all those supplies I 
> bought so cheaply?No I will not but when I need a belt for my own use from 
> now on I will lace it this way.Thank you Dave for that link and you too 
> Rob for the nice article.Alan in Michigan
>      From: Mike Royster <mr at carolina.rr.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com>
> Sent: Thursday, November 6, 2014 6:37 PM
> Subject: Re: [SEL] Probably Worth Printing??
>
> Cool
>
>
> -----Original Message----- 
> From: Rob Skinner
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
>
>
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>>
>> ??and/or saving. See:
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
>
>
>
> Right on, Dave.
> Hand lacing isn?t difficult, and it looks a lot better than metal lacing.
> Here?s an article that I did a while back.
> https://dl.dropboxusercontent.com/u/5110183/Leather%20Belt%20Stitching.pdf
>
> Rob
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 



From frank at lbpinc.com  Fri Nov  7 05:42:05 2014
From: frank at lbpinc.com (Frank DeWitt)
Date: Fri, 07 Nov 2014 08:42:05 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC><1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
	<DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
Message-ID: <545CCC2D.8040601@lbpinc.com>

You just need one on a little table in the front hall.  No one needs a 
phone in every room
Frank

Dave PS, Now if I can find two more of those black phones with dials on 
them, I will have one for every room in my home! On Nov 6, 2014, at 7:57 
PM, Alan <rustaholic777 at yahoo.com> wrote:

-- 
--------------
HONOR GOD
SERVE PEOPLE
DEVELOP EXCELLENCE
GROW PROFITABLE
FOLLOWING BIBLICAL PRINCIPLES

    Frank DeWitt           |  mailto:frank at lbpinc.com
    Mechanical Design      |  Phone:  585 624 3052
    LBP  INC.              |
    2365 Cox Rd.           |
    Bloomfield NY 14469    |Web  http://www.lbpinc.com/



From rotigel at me.com  Fri Nov  7 09:16:07 2014
From: rotigel at me.com (David Rotigel)
Date: Fri, 07 Nov 2014 12:16:07 -0500
Subject: [SEL] =?windows-1252?q?Probably_Worth_Printing=85=85?=
In-Reply-To: <545CCC2D.8040601@lbpinc.com>
References: <70945A2549834348BB54AA7EB3763BE9@RoysterPC>
	<1847866701.118021.1415321834888.JavaMail.yahoo@jws106145.mail.bf1.yahoo.com>
	<56CF2A17-10A2-49FF-8521-1E3D729D8B4C@me.com>
	<DFC7B3969F464AD486C4747CB977DF81@RoysterPC>
	<545CCC2D.8040601@lbpinc.com>
Message-ID: <B6F8EEC8-6A23-4AD4-B930-3754C63CB183@me.com>

But what if you are on a party line and one of the phones is busy?
	Dave

On Nov 7, 2014, at 8:42 AM, Frank DeWitt <frank at lbpinc.com> wrote:

> You just need one on a little table in the front hall.  No one needs a 
> phone in every room
> Frank
> 
> Dave PS, Now if I can find two more of those black phones with dials on 
> them, I will have one for every room in my home! On Nov 6, 2014, at 7:57 
> PM, Alan <rustaholic777 at yahoo.com> wrote:
> 
> -- 
> --------------
> HONOR GOD
> SERVE PEOPLE
> DEVELOP EXCELLENCE
> GROW PROFITABLE
> FOLLOWING BIBLICAL PRINCIPLES
> 
>    Frank DeWitt           |  mailto:frank at lbpinc.com
>    Mechanical Design      |  Phone:  585 624 3052
>    LBP  INC.              |
>    2365 Cox Rd.           |
>    Bloomfield NY 14469    |Web  http://www.lbpinc.com/
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel



From oldengine at comcast.net  Fri Nov  7 16:52:27 2014
From: oldengine at comcast.net (Harry)
Date: Fri, 07 Nov 2014 19:52:27 -0500
Subject: [SEL] http://www.old-engine.com/belts2.htm
In-Reply-To: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
References: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
Message-ID: <545D694B.2040600@comcast.net>

Posted in 2001. ;-) From an old original book.

http://www.old-engine.com/belts2.htm


On 11/7/2014 12:00 PM, sel-request at lists.stationary-engine.com wrote:
> -----Original Message-----
> Sent: Thursday, November 06, 2014 11:17 AM
> To: SEL ATIS
> Subject: Re: [SEL] Probably Worth Printing??
>
>
>> On Nov 6, 2014, at 5:57 AM, David Rotigel <rotigel at me.com> wrote:
>>
>> ??and/or saving. See:
>> http://www.farmcollector.com/equipment/how-to-lace-a-flat-belt.aspx?newsletter=1&utm_source=Sailthru&utm_medium=email&utm_term=FCM_GEM%20eNews%20Split%20A_US&utm_campaign=11.4.14%20FC%20eNews%20split%20A_US#axzz3I7486QEh
>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com



From djohn2 at bigpond.net.au  Fri Nov  7 17:40:30 2014
From: djohn2 at bigpond.net.au (derek)
Date: Sat, 8 Nov 2014 12:10:30 +1030
Subject: [SEL] Barn Fresh Aussie Auction
In-Reply-To: <545D694B.2040600@comcast.net>
References: <mailman.3.1415379601.32166.sel@lists.stationary-engine.com>
	<545D694B.2040600@comcast.net>
Message-ID: <000001cffaf4$fb530540$f1f90fc0$@net.au>

http://www.elders.com.au/livestock/sales-classified-listings/plant-machinery
-clearing-sales/photos?id=2194

Nov 14th Paringa, 



From kosh at ncweb.com  Mon Nov 10 14:56:18 2014
From: kosh at ncweb.com (Dave Merchant)
Date: Mon, 10 Nov 2014 17:56:18 -0500
Subject: [SEL] test
Message-ID: <54614292.9080008@ncweb.com>

ISP changed stuff, no SEL mail in a while...

Dave Merchant



From randmingold at hotkey.net.au  Mon Nov 10 15:07:29 2014
From: randmingold at hotkey.net.au (Reg)
Date: Tue, 11 Nov 2014 10:07:29 +1100
Subject: [SEL] test
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <641DEADCCD6A438481A8DFC4288AD085@REGPC>

Quiet here too!
Reg

-----Original Message----- 
From: Dave Merchant 
Sent: Tuesday, November 11, 2014 9:56 AM 
To: sel at lists.stationary-engine.com 
Subject: [SEL] test 

ISP changed stuff, no SEL mail in a while...

Dave Merchant

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From mls477 at ntelos.net  Mon Nov 10 15:36:07 2014
From: mls477 at ntelos.net (Mark L Shattuck)
Date: Mon, 10 Nov 2014 18:36:07 -0500
Subject: [SEL] test
In-Reply-To: <641DEADCCD6A438481A8DFC4288AD085@REGPC>
References: <54614292.9080008@ncweb.com>
	<641DEADCCD6A438481A8DFC4288AD085@REGPC>
Message-ID: <54614BE7.6020706@ntelos.net>

Its Also Quiet here, Only the bears are chasing the deer around .
                                        Mark Shattuck
                                         Waynesboro Va
On 11/10/2014 6:07 PM, Reg wrote:
> Quiet here too!
> Reg
>
> -----Original Message-----
> From: Dave Merchant
> Sent: Tuesday, November 11, 2014 9:56 AM
> To: sel at lists.stationary-engine.com
> Subject: [SEL] test
>
> ISP changed stuff, no SEL mail in a while...
>
> Dave Merchant
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>



From asouth42 at embarqmail.com  Tue Nov 11 11:38:49 2014
From: asouth42 at embarqmail.com (Arthur Southwell)
Date: Tue, 11 Nov 2014 14:38:49 -0500
Subject: [SEL] O.T. Veterans day
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <3030826DD84042839BF3D403630D9C38@ArthurHP1>


It's been said, excuses only satisfy those who make them: so, here's mine! 
I'm late in the day with a Thank You veterans for you service because I was 
preparing for the local Veterans Day Parade by posting 6 service flags 
around the U.S. Flag, POW/MIA flag, and making ready a float for the 
disabled veterans to ride on and marching in then parade with the American 
Legion Honor Guard.

To all my brothers and sisters in arms and those serving active today:

THANK YOU FOR YOUR SERVICE!

Arthur Southwell
Arcadia, FL 



From jlb941 at verizon.net  Tue Nov 11 18:55:21 2014
From: jlb941 at verizon.net (jlb941 at verizon.net)
Date: Tue, 11 Nov 2014 20:55:21 -0600 (CST)
Subject: [SEL] O.T. Veterans day
Message-ID: <8143948.3073739.1415760921660.JavaMail.root@vms170033>

   Thanks Art,
   Sounds like you more than remembered.



   Joe "Pip" Betz said that.
     ,-._,-,     [1]jlb941 at verizon.net
   [2]www.oldengine.org/members/betz
     \/)"(\/        If there are no dogs in heaven, when I die, I want to
   go where they went.
    (_0_)                      In memory of Bre-Dog




   On 11/11/14, Arthur Southwell<asouth42 at embarqmail.com> wrote:

   It's been said, excuses only satisfy those who make them: so, here's
   mine!
   I'm late in the day with a Thank You veterans for you service because I
   was
   preparing for the local Veterans Day Parade by posting 6 service flags
   around the U.S. Flag, POW/MIA flag, and making ready a float for the
   disabled veterans to ride on and marching in then parade with the
   American
   Legion Honor Guard.
   To all my brothers and sisters in arms and those serving active today:
   THANK YOU FOR YOUR SERVICE!
   Arthur Southwell
   Arcadia, FL
   _______________________________________________
   SEL mailing list
   [3]SEL at lists.stationary-engine.com
   [4]http://www.stationary-engine.com/mailman/listinfo/sel

References

   1. mailto:jlb941 at verizon.net
   2. http://www.oldengine.org/members/betz
   3. mailto:SEL at lists.stationary-engine.com
   4. http://www.stationary-engine.com/mailman/listinfo/sel


From maytagtwin at aol.com  Tue Nov 11 22:51:36 2014
From: maytagtwin at aol.com (maytagtwin@aol.com,)
Date: Wed, 12 Nov 2014 01:51:36 -0500
Subject: [SEL] test
In-Reply-To: <54614292.9080008@ncweb.com>
References: <54614292.9080008@ncweb.com>
Message-ID: <8D1CC5C3D273602-F70-F574@webmail-va111.sysops.aol.com>


Hi Dave,
You reached me here in Missouri via SEL.
 
Ron Carroll
 
 
-----Original Message-----
From: Dave Merchant <kosh at ncweb.com>
To: sel <sel at lists.stationary-engine.com>
Sent: Mon, Nov 10, 2014 4:59 pm
Subject: [SEL] test


ISP changed stuff, no SEL mail in a while...

Dave Merchant

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

 


From patrick.livingstone at gmail.com  Wed Nov 19 03:08:42 2014
From: patrick.livingstone at gmail.com (Patrick Livingstone)
Date: Wed, 19 Nov 2014 22:08:42 +1100
Subject: [SEL] Coolspring 2015
Message-ID: <D092C56A.6EDA%patrick.livingstone@gmail.com>

My flights are booked and I will be winging my way over to the USA for the
Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
meet up with quite a few list members there :)
Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html





From ron217_2000 at yahoo.com  Wed Nov 19 03:29:39 2014
From: ron217_2000 at yahoo.com (Ron Frost)
Date: Wed, 19 Nov 2014 11:29:39 +0000 (UTC)
Subject: [SEL] Coolspring 2015
In-Reply-To: <D092C56A.6EDA%patrick.livingstone@gmail.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
Message-ID: <1888726379.2486259.1416396579232.JavaMail.yahoo@jws10670.mail.bf1.yahoo.com>

That will be great. Looking forward to meeting you. ??Ron Perma Frost ?

 ? ? 

     On Wednesday, November 19, 2014 6:22 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
   

 My flights are booked and I will be winging my way over to the USA for the
Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
meet up with quite a few list members there :)
Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From Jim at hardmanfamily.net  Wed Nov 19 04:22:14 2014
From: Jim at hardmanfamily.net (Jim Hardman)
Date: Wed, 19 Nov 2014 07:22:14 -0500
Subject: [SEL] More Steam than Gas
Message-ID: <2F57CCE48D1A4A129C1539641AFBD6BF@JamesDesktop>


Two quick items...

Patrick, it will be good to meet you at Coolspring.  It's a great show!

You didn't mention Samuel, your engineer-in-chief...  Perhaps in a couple years...

And two, my brother sends the following video.  More steam than IC, but I enjoyed it and pass it along.


https://www.youtube.com/watch?v=fZTtpn2Lodk 

And to everyone, Happy Thanksgiving!

Jim

From rotigel at me.com  Wed Nov 19 08:05:06 2014
From: rotigel at me.com (David Rotigel)
Date: Wed, 19 Nov 2014 11:05:06 -0500
Subject: [SEL] Coolspring 2015
In-Reply-To: <D092C56A.6EDA%patrick.livingstone@gmail.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
Message-ID: <8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>

As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
	Dave

On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:

> My flights are booked and I will be winging my way over to the USA for the
> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
> meet up with quite a few list members there :)
> Patrick
> 
> Patrick M Livingstone
> 0418 692013
> Earlwood NSW
> http://www.oldengine.org/members/pml/Index.html
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From 1oldengin at gmail.com  Thu Nov 20 06:17:32 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 09:17:32 -0500
Subject: [SEL] Flywheel
Message-ID: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>

I am looking for a flywheel 56-60 inches, any ideas.  Leroy


From jnyost at yahoo.com  Thu Nov 20 06:41:33 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Thu, 20 Nov 2014 09:41:33 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
Message-ID: <EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>

Can u use one that has a crack or u gonna need a good one?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Thu Nov 20 17:47:11 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 20:47:11 -0500
Subject: [SEL] Test
Message-ID: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>

New phone test Leroy


From 1oldengin at gmail.com  Thu Nov 20 17:55:46 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 20 Nov 2014 20:55:46 -0500
Subject: [SEL] Flywheel
In-Reply-To: <EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
Message-ID: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>

At this time a cracked one is better than none.  Leroy
 Can u use one that has a crack or u gonna need a good one?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>
> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From randmingold at hotkey.net.au  Thu Nov 20 17:59:32 2014
From: randmingold at hotkey.net.au (Reg)
Date: Fri, 21 Nov 2014 12:59:32 +1100
Subject: [SEL] Test
In-Reply-To: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
References: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
Message-ID: <F63D2EF74C2E44C98673F0D3F8C63833@REGPC>

Yup!

-----Original Message----- 
From: Leroy Clark 
Sent: Friday, November 21, 2014 12:47 PM 
To: The SEL email discussion list 
Subject: [SEL] Test 

New phone test Leroy
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


From jneth3 at mac.com  Thu Nov 20 19:13:12 2014
From: jneth3 at mac.com (John Neth)
Date: Thu, 20 Nov 2014 22:13:12 -0500
Subject: [SEL] Test
In-Reply-To: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
References: <CA+B8urQEQmFMf1NQdp0mT_kpYk22pEqzgyaRD3ruaAcwhp3bew@mail.gmail.com>
Message-ID: <C4CB90C9-B1A4-4618-B793-0A32B680AB4A@mac.com>

Came thru to Upper East Tennessee .

Sent from my iPhone

> On Nov 20, 2014, at 8:47 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> New phone test Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Fri Nov 21 03:46:55 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Fri, 21 Nov 2014 06:46:55 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
Message-ID: <CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>

Jim do you have a picture?
On Nov 20, 2014 8:55 PM, "Leroy Clark" <1oldengin at gmail.com> wrote:

> At this time a cracked one is better than none.  Leroy
>  Can u use one that has a crack or u gonna need a good one?
>
> Sent from my iPhone
> Jim
>
> > On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> >
> > I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


From jnyost at yahoo.com  Fri Nov 21 04:47:27 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Fri, 21 Nov 2014 07:47:27 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<CA+B8urTZ2WbGA418tLEi04VakukEQdKrNeUSB7oaN+yx=o0R9w@mail.gmail.com>
Message-ID: <FBC717BA-577A-4B37-8262-2FA91EB6D3EF@yahoo.com>

I was gonna chk on this end of the earth with a couple guys to see if they had any. I'll let ya know

Sent from my iPhone
Jim

> On Nov 21, 2014, at 6:46 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> Jim do you have a picture?
>> On Nov 20, 2014 8:55 PM, "Leroy Clark" <1oldengin at gmail.com> wrote:
>> 
>> At this time a cracked one is better than none.  Leroy
>> Can u use one that has a crack or u gonna need a good one?
>> 
>> Sent from my iPhone
>> Jim
>> 
>>> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>>> 
>>> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel



From russell at ncable.com.au  Fri Nov 21 16:05:02 2014
From: russell at ncable.com.au (Russell)
Date: Sat, 22 Nov 2014 11:05:02 +1100
Subject: [SEL] Coolspring 2015
In-Reply-To: <8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
	<8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
Message-ID: <4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>

Gday Dave, mate I have a leave pass and thinking about heading over again. Can you bring the bigger eski??

regards Russ


On 20/11/2014, at 3:05 AM, David Rotigel wrote:

> As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
> 	Dave
> 
> On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
> 
>> My flights are booked and I will be winging my way over to the USA for the
>> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
>> meet up with quite a few list members there :)
>> Patrick
>> 
>> Patrick M Livingstone
>> 0418 692013
>> Earlwood NSW
>> http://www.oldengine.org/members/pml/Index.html
>> 
>> 
>> 
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From rotigel at me.com  Fri Nov 21 16:18:26 2014
From: rotigel at me.com (David Rotigel)
Date: Fri, 21 Nov 2014 19:18:26 -0500
Subject: [SEL] Coolspring 2015
In-Reply-To: <4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>
References: <D092C56A.6EDA%patrick.livingstone@gmail.com>
	<8B754288-76E3-402B-80B0-9EF3958C66E7@me.com>
	<4DBBE72B-1294-4EDD-B376-6BB3A2F1E303@ncable.com.au>
Message-ID: <7F83DF38-6555-484C-B1A8-8A4E28F99801@me.com>

I think that can be arranged, Russ!
	Dave

On Nov 21, 2014, at 7:05 PM, Russell <russell at ncable.com.au> wrote:

> Gday Dave, mate I have a leave pass and thinking about heading over again. Can you bring the bigger eski??
> 
> regards Russ
> 
> 
> On 20/11/2014, at 3:05 AM, David Rotigel wrote:
> 
>> As always Patrick, Arnie and I and many of the SEL folks will be at the end of row 2 near the trees. We will be looking for you and expect that you will make the SEL area your "home away from home" while at Coolspring. There will be canopies, chairs, water, soda (and someone last year even hinted that, perhaps, some adult beverages) there for your enjoyment! Looking forward to seeing you there!
>> 	Dave
>> 
>> On Nov 19, 2014, at 6:08 AM, Patrick Livingstone <patrick.livingstone at gmail.com> wrote:
>> 
>>> My flights are booked and I will be winging my way over to the USA for the
>>> Flame Ignition Expo at Coolspring next year. Hopefully I will be able to
>>> meet up with quite a few list members there :)
>>> Patrick
>>> 
>>> Patrick M Livingstone
>>> 0418 692013
>>> Earlwood NSW
>>> http://www.oldengine.org/members/pml/Index.html
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>> 
>> 
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From jnyost at yahoo.com  Sat Nov 22 17:09:57 2014
From: jnyost at yahoo.com (Jim Yost)
Date: Sat, 22 Nov 2014 20:09:57 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
Message-ID: <93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>

Leroy, I haven't heard bak from John if he has one. What ya using it for?

Sent from my iPhone
Jim

> On Nov 20, 2014, at 8:55 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> 
> At this time a cracked one is better than none.  Leroy
> Can u use one that has a crack or u gonna need a good one?
> 
> Sent from my iPhone
> Jim
> 
>> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
>> 
>> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


From 1oldengin at gmail.com  Sun Nov 23 13:06:00 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Sun, 23 Nov 2014 16:06:00 -0500
Subject: [SEL] Flywheel
In-Reply-To: <93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
Message-ID: <CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>

I bought a 15-20 hp oil city have not seen it but trust the seller no
wheels but every thing else is good.
 On Nov 22, 2014 8:13 PM, "Jim Yost" <jnyost at yahoo.com> wrote:

> Leroy, I haven't heard bak from John if he has one. What ya using it for?
>
> Sent from my iPhone
> Jim
>
> > On Nov 20, 2014, at 8:55 PM, Leroy Clark <1oldengin at gmail.com> wrote:
> >
> > At this time a cracked one is better than none.  Leroy
> > Can u use one that has a crack or u gonna need a good one?
> >
> > Sent from my iPhone
> > Jim
> >
> >> On Nov 20, 2014, at 9:17 AM, Leroy Clark <1oldengin at gmail.com> wrote:
> >>
> >> I am looking for a flywheel 56-60 inches, any ideas.  Leroy
> >> _______________________________________________
> >> SEL mailing list
> >> SEL at lists.stationary-engine.com
> >> http://www.stationary-engine.com/mailman/listinfo/sel
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


From 1oldengin at gmail.com  Sun Nov 23 13:18:05 2014
From: 1oldengin at gmail.com (Leroy Clark)
Date: Sun, 23 Nov 2014 16:18:05 -0500
Subject: [SEL] Flywheel
In-Reply-To: <CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>
References: <CA+B8urShEYa6yUE9qQRiavqWQUQ1G=rBnNEuwKSZmM0i3kdLMQ@mail.gmail.com>
	<EEB9B458-79D5-481E-8507-82DD9E30094B@yahoo.com>
	<CA+B8urRtRepUxHPgHEoiufZaZnuOmAhne6KNjzpsZv=X01q_og@mail.gmail.com>
	<93CDF893-5A22-4FD1-AADC-F3B45047BA18@yahoo.com>
	<CA+B8urTb3_DntNUjjHBf-uyB=gJtDC3eJiFCKvm-+3GZQufvrw@mail.gmail.com>
Message-ID: <CA+B8urQksgxb+wG8XQkqjes+keAjPNEHhkeQT6QjR+oWY3JWPA@mail.gmail.com>

419.310.2557


From cgandree at mchsi.com  Sun Nov 30 04:55:39 2014
From: cgandree at mchsi.com (cgandree at mchsi.com)
Date: Sun, 30 Nov 2014 06:55:39 -0600 (CST)
Subject: [SEL] Fwd: An important message to all R&V engine owners from Peter
	Lowe
In-Reply-To: <c8176.56d75a6c.41ac6bec@aol.com>
Message-ID: <2074160766.1199651417352139692.JavaMail.root@dsmdc-mail-mbs11>

FYI.
For all you R&V collectors here is an important message from Peter Lowe about another planning of a great event.
I plan to be there, who else?
Curt Andree








----- Forwarded Message -----
From: Cgandree at aol.com
To: cgandree at mchsi.com
Sent: Sunday, November 30, 2014 6:47:40 AM GMT -06:00 US/Canada Central
Subject: Fwd: An important message to all R&V engine owners from Peter Lowe








From: plowe at exemail.com.au 
To: plowe at exemail.com.au 
Sent: 11/30/2014 4:29:14 A.M. Central Standard Time 
Subj: An important message to all R&V engine owners from Peter Lowe 



Hi all. 
Well, I have been contacted by the Geneseo IL AE&TA club that hosted the 2003 R&V Centenary Expo is relation to running another R&V Feature Show. 
The contact is Paul Searl and he runs the RockIslandPlowCo.com website http://www.rockislandplowco.com/ 
The earliest date would be Sept. 2016 possibly 2017. 
We would like to get all R&V Register Members to this show if the massive effort involved is to be under taken. I am prepared to travel 10,000Km if you guys are prepared to travel a few hundred miles. It would be a big feat to match the 2003 and the great 2010 shows, but R&V engines are a rarer breed and it would be great to get members together to compare and share. 
Any way, I have started the ball rolling, please come back with your thoughts. Paul can be contacted on 309-781-2896 but also please keep me in the loop. 

Regards 
Peter Lowe 
R&V Engine Registrar 
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm 


I was wondering who is in charge of the R&V Expo's, I figured you might know who to talk to? In 2003 the Geneseo IL AE&TA club hosted an expo, and a group of us have been talking about trying to have another. I don't think anyone who was directly involved in that one is still active in the club so we would be starting from scratch. The club had a bit of a bad run with the engine guys directly after 2003 show, and its taken til now to get some engine guys back really active in the club. The board is very interested in it and the current president is one of the main guys spearheading it. Time frame would be sept 2016 at the earliest (show is always second weekend after labor day so usually second full weekend of Sept for Fri-Sun). 2015 will be the National Rumely Expo, so that pushes us back to 2016 or 17. I doubt we would have more than a couple of engines from within the club unless we get a sudden influx, so success would come heavily from outside. The show grounds are actually closer to Moline IL now, and are easier to access, camping is limited right now in the show grounds but that may be fixed very soon, there is also a campground about a mile away and multiple hotels. Show space is virtually unlimited and if a tour was wanted again, the club could help arrange buses. The show is significantly larger than in 2003. I would probably be the main club contact at this point. the website is http://ae-ta.com/. 

Anyway, feel free to pass this along to whomever it should go to. my number is 309-781-2896. 

Paul Searl