[SEL] Stover hot tube

[Arnie Fero]

George,

Contact Mr. Stover,  Joe Maurer  at  toadhill at aeroinc.net
I'm sure that he'll be able to help.

See ya,  Arnie

PS - Have you had a chance to compile the Lorenz & Benz
serial numbers and photos from your recent HOWT?
The register awaits...  8-))

On Thu, June 6, 2013 12:56 pm, Best, George wrote:
> Here's a clip from a Helen French article from back in 2003.  This if from
> the time she used to do a GEM article on the SEL postings.
>
> "I haven't had my vertical Stover out of the shed for 15 years, and since
> it has the hot tube, I never ran it on the ignitor, anyway. If I recall,
> there were no marks on the cam gear and I just set it by trial and error."
>
> It's a long shot, but wondering if the person with the Stover hot tube is
> still on SEL or not.
>
> I am trying to find information on the Stover hot tubes with the idea of
> putting one on my 1903 4hp tank cooled Stover.  It has the hot tube base,
> but missing the chimney and hot tube.
>
>
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an
> authorized representative of the intended recipient, you are hereby
> notified that any dissemination of this communication is strictly
> prohibited. If you have received this communication in error, please
> notify us immediately by e-mail and delete the message and any attachments
> from your system.
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>