[SEL] Delco Battery Charging Help

[cgandree at mchsi.com]

Hi Peter,
Thank you for this information. Are you connected to SKYPE as I would like to chat with you on this project.
Regards,
Curt Andree


----- Original Message -----
From: "Listerdiesel" <listerdiesel at gmail.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, October 21, 2012 8:03:36 AM GMT -06:00 US/Canada Central
Subject: Re: [SEL] Delco Battery Charging Help

On 21 October 2012 13:31,  <cgandree at mchsi.com> wrote:
> Unfortunately the engine is bolted to the concrete floor in our display building with the flywheel butted right up against the wall so cranking is imposible, plus there is not a crank for it. Alan you mentioned a newer model with 6v starter, which model is that? Might see if I can locate a 36v golf cart charger somewhere and try that too.
> If any of you have had experience with cleaning and recharging delco battery banks I would appreciate a response and phone number where I could chat with you directly.
> Thank you,
> Curt Andree
>

Curt:

Look for TDK-Lambda LS100-36 power supply. It is universal input, 32V
to 40V adjustable output at 3A.

pricing in the UK is about £27 or so, plus carriage, you should find
it at Mouser or Digikey:

http://www.digikey.com/product-detail/en/LS100-36/285-1808-ND/1918819

$38.13 pluis shipping and taxes..

Peter
-- 
Peter A Forbes
Email: listerdiesel at gmail.com
http://www.oldengine.org/members/diesel
http://stationary-engine.co.uk
http://www.oldengine.co.uk

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel