[SEL] 6hp Gal sawrig

[Richard Strobel]

Don't do that Alan..we still have dial phones and stagecoach holdup's :-)

But I'll work on a video somehow.

Rick


----- Original Message ----- 
From: "Alan" <rustaholic777 at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, October 11, 2012 5:16 PM
Subject: Re: [SEL] 6hp Gal sawrig


youtube video??????
Alan

--- On Thu, 10/11/12, Richard Strobel <Richard_Strobel7 at msn.com> wrote:


From: Richard Strobel <Richard_Strobel7 at msn.com>
Subject: [SEL] 6hp Gal sawrig
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Date: Thursday, October 11, 2012, 6:41 PM



Well after about a year and a half we finally built a fire in her. Our 
first low tension ignitor fired and it sure likes to spark on the outside 
linkage. A jumper wire from ignitor frame to movable contact does seem to 
help.
New points from Starbolt.

We did have the cylinder sleeved and after an hour or so..compression is 
great and very satisfied.

Comments welcome..the movable shaft on the ignitor does have slop and 
there's no axial loading as compared to a Webster.

Live is good in The Big Sky !!

RickinMt. 

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel