[SEL] 9 hp Galloway setback

Richard Strobel Richard_Strobel7 at msn.com
Wed May 9 07:01:58 PDT 2012


Tommy...any idea on how to contact Ken Meeks?  I thought he was a sponsor on 
Harry's but don't see him there now.

Thanks,
Rick


----- Original Message ----- 
From: "Judge Tommy Turner" <lcjudge at scrtc.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Monday, January 30, 2012 1:33 PM
Subject: Re: [SEL] 9 hp Galloway setback


> Fooling with skirts has gotten guys in a lot of trouble through the years.
> I think you'll be OK in this case though.  6 1/2" should be a fairly easy 
> to
> find size.  I'd bet Ken Meeks would have one.  No telling what it may be 
> out
> of but if its 6 1/2 x 8 or so, you could make a go of it.
>
> Tommy Turner
> Magnolia, KY
>
>
>
>
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Richard
> Strobel
> Sent: Monday, January 30, 2012 2:26 PM
> To: The SEL email discussion list; stationary-engine
> Subject: [SEL] 9 hp Galloway setback
>
> Howdee all;
>
>   Well after pressure washing out the gunk behind the piston, it now shows
> ~1" x 2" chunk out of the piston skirt.  So we are looking for 
> one...6-1/2"
> dia. bore and piston is ~8-1/2" long.  Piston is still stuck so we can't 
> get
> exact measurements.
>
>   If all else fails we will have to have one made so are there any
> recommendations out there for having one made?
>
> Thanks much!!
> RickinMt.
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 



More information about the sel mailing list