[SEL] gluing plastic OT

[Alan]

In the hardware stores around here there are bottles with all kinds of stuff glued to them with PC-7.
With that hood off the mower it would be super easy to mix up some PC-7 and spread a layer on the underside.  It is stong stuff.
Alan in Michigan

--- On Sat, 3/10/12, Germoamer at aol.com <Germoamer at aol.com> wrote:


From: Germoamer at aol.com <Germoamer at aol.com>
Subject: Re: [SEL] gluing plastic OT
To: sel at lists.stationary-engine.com
Date: Saturday, March 10, 2012, 7:33 AM





In a message dated 3/9/2012 9:20:56 P.M. Eastern Standard Time,  
curt at rustyiron.com writes:

I'd focus first on identifying the material your hood is made of,  then
seek the appropriate adhesive
----------------------------------------------------------------------------
---------------------------------

Thanks for all the input fellas!  I think I will contact JD and see  if 
they will tell me type of plastic the hood is made out of, then go from  there. 
PC-7 sounds mighty interesting and will look into it.  I had  also thought 
about drilling a hole at the end of the crack, just like we do on  the old 
engines.  
Right now the entire hood is off the mower so not to damage any  further.  

Thanks,  

Tom  Schmutz
Concord, Va.  
germoamer at aol.com


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel