[SEL] gluing plastic OT

[Steve W.]

Germoamer at aol.com wrote:
> I own a John Deere lawnmower with a plastic hood.  I have developed a  
> crack in the hood near where it latches on each side of the mower.  At this  
> same location the upper and lower halves of the hood are bolted together and 
> the  nut area has broken out a piece of the plastic.  
>  
> Any suggestions for a good thin "crazy" type glue.  I need something  thin 
> that will go into the crack.   At one time I worked for Eastman  Kodak, and 
> the Eastman 910 glue was great stuff.  
>  
> Thanks  
> 
> Tom  Schmutz
> Concord, Va.  
> germoamer at aol.com
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 

The same "glue" used for PVC pipe should do the trick. Then add a brace 
if there is room.

-- 
Steve W.