[SEL] I just found a 5 3/4 inch piston out in my shop

[John & Beryl Cooper]

Hi Mark,
I have a 6 HP Bagshaw which appears to be a copy of a Fairbanks, I need a
new piston about that size.Wondering if it will fit.I can get the diameter
but would need to take the piston out to get the other measurements.
John Cooper,
BEGA,
Australia.

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Mark Shulaw
Sent: Monday, 4 June 2012 2:17 PM
To: The SEL email discussion list
Subject: Re: [SEL] I just found a 5 3/4 inch piston out in my shop


There is a Fairbanks 6 HP engine that used a 5 3/4" with 3/16"  wide 
rings so probably so.   Mark S.


At 07:50 PM 6/3/2012, you wrote:
>Thanks mark, I just boxed it up. The rings are narrow compared to 
>antique engine rings I have seen. Because the engines it came with were 
>Fairbanks, That would be my guess
>
>Roger DiRuscio, Broker Associate, R.E. Realty Experts Equi-Trac, 
>Res.net AMP, Equator Platinum & CDPE Certified RSD, CBS, REO, BPO. GRI, 
>PMC, NABPOP Member. Website : rogerdiruscio.com  RDC-PRO, Five Star 
>Force. 41051 Mission Blvd. Alameda County.
>Fremont, CA 94539    DRE #615513. Sales since 1977
>510-676-3122 cell  510-226-2444 x 2414 Office
>Ham radio KG6QKZ CERT volunteer.
>Skype: scrapologist1
>
>-----Original Message-----
>From: sel-bounces at lists.stationary-engine.com
>[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Mark 
>Shulaw
>Sent: Sunday, June 03, 2012 4:04 PM
>To: The SEL email discussion list
>Subject: Re: [SEL] I just found a 5 3/4 inch piston out in my shop
>
>
>Hi Roger,
>    Well Fairbanks Morse 6 HP engines were just one of them that used 
>that size piston, Hercules did to with the 7 HP and the Novo 6 HP .
>Whats the ring groove width? That will narrow it down some.   Any
>part numbers?  The top of piston to center of wrist pin dimension
>tells the rest of the story.     Mark   S.
>
>
>
>At 05:02 PM 6/3/2012, you wrote:
> >I think it is a Fairbanks Morse piston anyone have an idea what 
> >engine this would fit
> >
> >Roger DiRuscio, Broker Associate, R.E. Realty Experts Equi-Trac, 
> >Res.net AMP, Equator Platinum & CDPE Certified RSD, CBS, REO, BPO. 
> >GRI, PMC, NABPOP Member. Website : rogerdiruscio.com  RDC-PRO, Five 
> >Star Force. 41051 Mission Blvd. Alameda County.
> >Fremont, CA 94539    DRE #615513. Sales since 1977
> >510-676-3122 cell  510-226-2444 x 2414 Office
> >Ham radio KG6QKZ CERT volunteer.
> >Skype: scrapologist1
> >
> >
> >
> >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com 
> >http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>Mark Shulaw
>454 County Road 33
>Bluffton, OH. 45817
>USA
>
>Frappi at wcoil.com / 419.358.5206  Home
>Hobby Collector and Dealer in John Deere
>and Hercules Engines.
>Maytag Multi-Motor Engine parts.
>VISIT the Maytag Collectors Club at  www.Maytagclub.com
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel


Mark Shulaw
454 County Road 33
Bluffton, OH. 45817
USA

Frappi at wcoil.com / 419.358.5206  Home
Hobby Collector and Dealer in John Deere
and Hercules Engines.
Maytag Multi-Motor Engine parts.
VISIT the Maytag Collectors Club at  www.Maytagclub.com  

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel