[SEL] Rod end babbitt in 3hp Galloway

[Richard Strobel]

Thanks Curt...gear mesh was something I would have not considered.

Rick


----- Original Message ----- 
From: <curt at rustyiron.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, August 07, 2012 7:45 PM
Subject: Re: [SEL] Rod end babbitt in 3hp Galloway


>
> Rick,
> On this link scroll down to the 6/24/05 date. There are 8 photos of
> pouring the Babbitt in the big end. It's still running great.
>
> <http://www.oldengine.org/members/holland/images/DevinsBakerMonitorRebuild/Thumbnails.html>
>
> Curt Holland
> Bessemer City, NC
>
>
> >
> >   G'day all;
> >   Well I finally got a rod and piston for the "Bulldog" Galloway and it
> > has
> > no babbitt on either side.  I'm at a loss here as I've never started 
> > from
> > scratch so going to need some help.  I have poured mains and such but
> > never
> > done a rod.
> >
> >   Any help would greatly be appreciated.
> >
> > Best regards,
> > RickinMt.
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>