[SEL] Head gasket material

[David Myers]

Rick,
We used 


________________________________
From: Richard Strobel <Richard_Strobel7 at msn.com>
To: The SEL email discussion list <sel at lists.stationary-engine.com> 
Sent: Thursday, April 5, 2012 3:11 PM
Subject: Re: [SEL] Head gasket material

6 and 9 hp Galloway.  yes that's a goot werd.

Rcik


----- Original Message ----- 
From: "David Myers" <walking_tractor at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, April 05, 2012 11:41 AM
Subject: Re: [SEL] Head gasket material


Rick,
Might be tomorrow, it's 30 miles away and I'm at work right now.
Be glad to find out.
Used a couple of kinds and different thicknesses.
Whatcha head gasketing? (Is that even a word?)
David


________________________________
From: Richard Strobel <Richard_Strobel7 at msn.com>
To: The SEL email discussion list <sel at lists.stationary-engine.com>
Sent: Thursday, April 5, 2012 11:02 AM
Subject: Re: [SEL] Head gasket material

Dave, I deal with them all the time, but they list a zillion different ones.
Could you look and see what you used please.

Mcmaster.com


Thanks much
Rick


----- Original Message ----- 
From: "David Myers" <walking_tractor at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, April 05, 2012 8:07 AM
Subject: Re: [SEL] Head gasket material


We got the material for the Fairbanks 47 from McMaster Carr.



________________________________
From: Richard Strobel <Richard_Strobel7 at msn.com>
To: The SEL email discussion list <sel at lists.stationary-engine.com>;
stationary-engine <stationary-engine at oldengine.org>
Sent: Thursday, April 5, 2012 9:46 AM
Subject: [SEL] Head gasket material

Where ya'll get your head gasket material?

TIA,
RickinMt.
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



Extreme-Temperature Compressible Graphite Gaskets
For the actual head gaskets.  Cuts real easy but you have to watch it as it is REAL slippery (duh, it's graphite).  Don't ask me how I know.
Can be had in 1/32", 1/16", and 1/8".
We used a variety of other gaskets for side covers and stuff.
 
So far it's worked very well, no signs of burning or blowout.  This is a large bore (14") semi-diesel.
 
Have fun,
David