[SEL] Spam> Re: Orings

cgandree at mchsi.com cgandree at mchsi.com
Wed May 11 03:32:31 PDT 2011


Thanks for your help Joe,
Curt
----- Original Message -----
From: "avanti 64" <avanti_64 at juno.com>
To: sel at lists.stationary-engine.com
Sent: Tuesday, May 10, 2011 8:08:55 PM GMT -06:00 US/Canada Central
Subject: [SEL] Spam> Re:  Orings

Buna N orings come in commercial grade oring assortment kits. These should be available to you at any Industrial Supplier or a Gasket/Packing supply house in your area. They may have the viton material also. Orings are sized by ID and Cross Section (thickness). Charts should be available on the Internet. Viton is more money, determine the size you need and order the quantity you need. All orings are black and round. You can't tell the difference between the material. When I worked in the business the spare EP orings were always in a seperate plastic bag and clearly marked with a label. Viton was the standard in all the mechanical seals and was installed when produced unless otherwise specified by the customer.
Joe

____________________________________________________________
Groupon.com Official Site
1 huge daily deal on the best stuff to do in your city. Try it today!
http://thirdpartyoffers.juno.com/TGL3131/4dc9e1c8a4c80355563st06vuc

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



More information about the sel mailing list