[SEL] OT - Thin wall socket

[James OHAGAN]

 Oops! 415 892 0236

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Best, George
Sent: Tuesday, August 23, 2011 10:17 AM
To: The SEL email discussion list
Subject: [SEL] OT - Thin wall socket

After checking a couple likely stores and finding no thin wall sockets, I'm
wondering about making my own.

Would it work to take an old cheap socket and turn the outside down on my
lathe?

Anyone try turning down a socket diameter before?


This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and confidential.
If the reader of the message is not the intended recipient or an authorized
representative of the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited. If you have
received this communication in error, please notify us immediately by e-mail
and delete the message and any attachments from your system.

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel