[SEL] Wooden spray tank repair.

[rdhaskell at juno.com]

Hi all.
Anyone on the list ever replaced the wood on an old tank for a spray rig?
 This one is about 4' long, 3' wide and 3' deep.  Round on the bottom and
held together with metal rods.  My question is about the long boards  on
the sides, the remaining boards are not tongue and groove they just butt
together and rely on the wood swelling up.  These boards have a slight
curve across their width, were them made that way or over the years of
being wet and clamped in place did they curve?
A lot of the original wood is there but saturated with arsenic and now
hazardous material and cannot be used.
Thanks for any suggestions.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell
____________________________________________________________
Mortgage Rates Hit 3.25%
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.juno.com/TGL3141/4c98feffc24ecd02c6st03vuc