[SEL] DELCO LIGHT PLANT HELP NEEDED

[cgandree at mchsi.com]

Ok Dave, the felt did the trick. Will now put a c-clip in to retain it better. Engine getting fuel now.  Also having a problem with the starter switch not holding.  I have to hold on to the switch to keep it running.  Not sure if one of those contact levers are bent.  If you could take some detailed pics of your starter (with cover off) so I can better see if there is some sort of wear I sure would appreciate it or if you have some other suggestion.  Also what is your phone number so I can chat with you a bit.
Thanks again,
Curt





                                                                                                                                                       ----- Original Message -----
From: "David Carter" <no1djc at hotmail.com>
To: sel at lists.stationary-engine.com
Sent: Monday, September 13, 2010 3:05:23 PM GMT -06:00 US/Canada Central
Subject: Re: [SEL] DELCO LIGHT PLANT HELP NEEDED


  Curt,

     The felt pad fits in the circular recess positioned between the plugged filter/jet chamber and the rotating slide. I held mine in with a "C" clip.   ........ http://good-times.webshots.com/photo/2327259350104310933efkZAb

 

Regards, Dave.

 

 
> Dave,
> I am not sure where that felt pad is supposed to go. When I take out that plug it has a screen fastened to the bottom with no evidence of a pad. Can you send me a detailed pic of the felt pad and where it goes please.
> thanks,
> Curt
 		 	   		  
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel