[SEL] One for the mathematicians out there :-)

[Jerry Evans]

Hi Guys,
         Thanks for all the answers. I was having problems with a small 
Chinese diesel engine but found the cause today.

         I got rather a lot of conflicting answers but it seems that the 
compression pressure should be around 920 Lbs/Sq. Inch)

         Some of you may be interested in reading my rather "long winded" 
(as usual) account of it here: :-)

<http://www.oldengine.org/members/evans/ringlan/index.htm>


         While you are on my site you may want to look at this page too:

<http://www.oldengine.org/members/evans/campbell/index.htm>

Campbell Horizontal cold starting heavy Oil Engine s/n 22439 - 16B.H.P. @ 
450 R.P.M
(This is the Cardiff, Wales, Campbell engine - not the Halifax built one)