[SEL] Need Help With Parts Identification

[Luke Tonneberger]

Hi Les,
 
The inlet and outlet have threaded holes on the second item with the IHC logo. I don't think rubber hoses hooked up to it. I was hoping someone would be able to look up the part number that is casted into it and be able to tell what engine it came off of.  
 
The governor looking thingy was identified as part of a Victrola or Edison phonograph wind up motor.


Luke Tonneberger
Rockford, Michigan
USA


----------------------------------------
> From: spiveylk at gru.net
> To: stationary-engine at oldengine.org
> Subject: Re: Need Help With Parts Identification
> Date: Tue, 15 Jun 2010 09:52:17 -0400
>
> The 2nd one looks more like a water pump. The connection ends look like
> they are for rubber hose. The fourth one looks like some type of adjustable
> governor. Must be fairly low speed as there isn't much bearing surface.
> As to what either one is for, I have no idea. Les
>
> ----- Original Message -----
> From: "Luke Tonneberger" 
>
>
> Looks like a fuel pump, what engine would it go on?
>
> http://www.oldengine.org/members/luket/temp/MVC-666F.JPG
> http://www.oldengine.org/members/luket/temp/MVC-668F.JPG
> http://www.oldengine.org/members/luket/temp/MVC-670F.JPG
>
>
>
>
> Looks like an IHC fuel pump, what engine would it go on?
>
> http://www.oldengine.org/members/luket/temp/MVC-676F.JPG
> http://www.oldengine.org/members/luket/temp/MVC-677F.JPG
> http://www.oldengine.org/members/luket/temp/MVC-674F.JPG
>
>
> Luke Tonneberger
> Rockford, Michigan
> USA 		 	   		  
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3