[SEL] Fairbanks Morse model 47 questions

[David Myers]

Thanks Mike.  This helps.
David

--- On Mon, 2/8/10, Mike Royster <mr at carolina.rr.com> wrote:


From: Mike Royster <mr at carolina.rr.com>
Subject: Re: [SEL] Fairbanks Morse model 47 questions
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Date: Monday, February 8, 2010, 9:10 PM


Regular Diesel will be just fine.


----- Original Message ----- 
From: "Elden DuRand" <edurand at mchsi.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, February 08, 2010 7:27 PM
Subject: Re: [SEL] Fairbanks Morse model 47 questions


David:

I think you can safely run your engines on today's #2 Diesel.

Take care - Elden
edurand at mchsi.com
http://www.oldengine.org/members/durand 

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of David Myers
> Sent: Monday, February 08, 2010 04:59 PM
> To: sel at lists.stationary-engine.com
> Subject: [SEL] Fairbanks Morse model 47 questions
> 
> 
> Hi guys,

........................................snip..........................

> Will these run on #1 diesel or do I need 
> kerosene? The manual for the 'Y' that I have 
> just mentions not using to heavy of fuel, I 
> realize our terminology is much different than it 
> was in the '30's.

.......................snip..........................

> Thanks,
> David Myers
> Paw Paw, MI


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel