[SEL] It's quiet! now shingle mill

[Richard Strobel]

  When it's working right Mike, the shingles are tapered.  The upper and lower sprockets have catches, short spaced and long spaced.  When one advances short the other advances long..then visa versa.

  Hopefully this video will clear it up;

http://good-times.webshots.com/video/3063583140039077051NPuznM?vhost=good-times<http://good-times.webshots.com/video/3063583140039077051NPuznM?vhost=good-times>

take care,
Rick
  ----- Original Message ----- 
  From: Michael Tucker<mailto:oldironnut at windstream.net> 
  To: The SEL email discussion list<mailto:sel at lists.stationary-engine.com> 
  Sent: Thursday, August 26, 2010 9:12 AM
  Subject: Re: [SEL] It's quiet!


    On 8/25/10 3:26 PM, Richard Strobel wrote:
  >    G'day all;
  >      Here are two video's (click next for the second one), that show the operation of the carriage and wood block advancing feature.  You might need some motion sickness pills on the first one...second one I used a monopod.  You'll see the clutch is sticky and this is a big priority to get fixed!

  Rick, GREAT looking saw!! Do the shingles have a tapered thickness or 
  are they uniform thickness?

  Mike
  _______________________________________________
  SEL mailing list
  SEL at lists.stationary-engine.com<mailto:SEL at lists.stationary-engine.com>
  http://www.stationary-engine.com/mailman/listinfo/sel<http://www.stationary-engine.com/mailman/listinfo/sel>