[SEL] It's quiet!

[Richard Strobel]

We do have a few horizontals shown at Montana shows, and they do have the vertical Chases' on the right side of the big river.  I've heard that one guy in Pa. even has the patterns.  BTW our 32 inch blade is not OEM...the smallest were 36 and were a special grind....still available but to the tune of 600 to  1000 rockets.

You take care,
Rick
  ----- Original Message ----- 
  From: Elden<mailto:edurand at mchsi.com> 
  To: The SEL email discussion list<mailto:sel at lists.stationary-engine.com> 
  Sent: Wednesday, August 25, 2010 10:26 AM
  Subject: Re: [SEL] It's quiet!


  Rick:

  Nice video!  That is the second shingle mill I've ever seen in
  action and is very different from the first one which had a
  horizontal saw blade.

  Which part tilts to make the taper, the saw or the carriage?

  Take care - Elden
  http://www.oldengine.org/members/durand<http://www.oldengine.org/members/durand>

  > -----Original Message-----
  > From: sel-bounces at lists.stationary-engine.com<mailto:sel-bounces at lists.stationary-engine.com>
  > [mailto:sel-bounces at lists.stationary-engine.com]On
  > Behalf Of Richard
  > Strobel
  > Sent: Tuesday, August 24, 2010 8:28 PM
  > To: The SEL email discussion list
  > Subject: Re: [SEL] It's quiet!
  >
  >
  > I guess now is a good time to show off our Chase
  > Shingle Mill.

  .................snippety snip........................

  _______________________________________________
  SEL mailing list
  SEL at lists.stationary-engine.com<mailto:SEL at lists.stationary-engine.com>
  http://www.stationary-engine.com/mailman/listinfo/sel<http://www.stationary-engine.com/mailman/listinfo/sel>