[SEL] CAST IRON WELDING

[Ray Freeman - Portable Line Boring]

It would be interesting to know successful silver soldering an exhaust
manifold would be as done on the Muggyweld site seeing that the melting
point of any silver solder would be below the operating temperature the
manifold.
Ray Freeman

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of
paulmaples at sbcglobal.net
Sent: Wednesday, 2 September 2009 6:04 AM
To: The SEL email discussion list
Subject: Re: [SEL] CAST IRON WELDING

Check out this website and watch the video clips they show welding cast iron

using their rods.

http://www.muggyweld.com/castiron.html

Paul

----- Original Message ----- 
From: "William Young" <wmlyoung at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, September 01, 2009 4:19 AM
Subject: Re: [SEL] CAST IRON WELDING



Greetings to SEL crew,
>From Bill Young in Japan
Re. Cast iron welding

What do we know, collectively, about welding our toys? I have always heard 
that it takes a trained technician using special equipment and rod to do a 
superlative job.
A few years ago ( before 9/11 ) I hauled a huge head to a shop in California

that did nothing but cast iron repairs. it was expensive but beautifully 
done and worked well for as long as I had the engine. I wanted to watch but 
was not permitted to do so.
Thanks, standing by, Bill
Another question: Suppose this topic had been discussed 5 or 10 years ago. 
Would it be archived somewhere and still available?
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel 

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel