[SEL] Wico type EK magneto help wanted

[Germoamer at aol.com]

In a message dated 10/23/2009 3:31:40 PM Eastern Daylight Time,  
rwenig2 at xplornet.com writes:

The  locating pin isn't worn appreciably as 
the diameter measures the same at  the top and the bottom where the 
armature doesn't touch so it should be  fine.


Be sure and measure the shaft at 90deg as it is usually oval  shaped.  As 
someone said, a few thousands clearance should do the job.  

Tom  Schmutz
Concord,  Va.
germoamer at AOL.com