[SEL] IH Type M

[Ray And Erica Freeman]

I have a 6 hp without the mag and I am unsure which mag it takes.It has a
spark plug so obviously high tension but how do I tell which one. Is the
plate that the mag bolts to different depending on the mag?
Ray Freeman

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Doug Tallman
Sent: Sunday, 4 October 2009 8:52 PM
To: The SEL email discussion list
Subject: Re: [SEL] IH Type M

Tom, there were actually 3 types. The low tension, a Bosch rotary high 
tension and the Wico EK Doug T

Germoamer at aol.com wrote:
> There were two types of mags, a low tension rotary mag for ignitor and a  
> high tension mag for spark plug.  I have two high tension types.   What 
> specifically do you need?   
>
> Tom  Schmutz
> Concord,  Va.
> germoamer at AOL.com
>
>
>   
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel