[SEL] Buzz coil

[Elden DuRand]

Jim:

I haven't done it since I was a kid (and I kinda stunk-up the shop when I did) but you can remove the panel from the coil and suspend it over a tray (to catch the tar) that sits on a hot plate that is set on low.

Nowadays, if you've got a heat gun, that might work better.

Take care - Elden
http://www.oldengine.org/members/durand 

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of Jim O'Hagan
> Sent: Sunday, October 04, 2009 08:13 PM
> To: 'The SEL email discussion list'
> Subject: [SEL] Buzz coil
> 
> 
> Hey thanks guys for the information on the coil 
> ignitions. Have any of you
> removed the tar to try to fix the internals? If 
> so, how do you remove it
> without setting your workshop on  fire? Jimmy