[SEL] thoughts on best repair

[Listerdiesel]

2009/11/30 Jim French <fbi at insulate.co.uk>:
> Hi all this is Jim not Dolly

Jim:

If you have the thickness of metal in the arm, drill out a core hole
in each half and put a mild steel pin longways in so that when welded
up it will support the break. Rather than an internal splint.

Peter
-- 
Peter A Forbes
Email: listerdiesel at gmail.com
http://www.oldengine.org/members/diesel
http://stationary-engine.co.uk
http://www.oldengine.co.uk