[SEL] Gear Cutting Needed

[Judge Tommy Turner]

Yeah Arnie, I went to Crush Gears in Louisville and they searched all
catalogs, Boston Gear, etc, and couldn't find anything to match.  I've
already had a blank cast and it just needs to have the bevel and teeth
cut.  Thanks!

Tommy Turner
Magnolia, KY




-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Arnie Fero
Sent: Sunday, January 25, 2009 5:43 PM
To: The SEL email discussion list
Subject: Re: [SEL] Gear Cutting Needed


Tommy,  I assume that you've tried "off the shelf" sources without
success? I think finding a commercial one would be far cheaper than
getting one cut to order.

See ya,  Arnie

On Sun, January 25, 2009 4:08 pm, Judge Tommy Turner wrote:
>
> I need to have a bevel gear cut.  Does anyone have a the name of a 
> person who does this?  I have had Phil Goetz of Michigan cut gears for

> me before and he does super work but he's not set up to cut bevels.  
> Any contact info is appreciated.




-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel