[SEL] Thread question

[rdhaskell at juno.com]

 Thanks for the warning Arnie.
One look at the price of $19+ made me take another approach.  I drilled
out a 1/4 28 nut, took an old broken tap and ground to use as a single
point on the lathe, just a few minutes and I had my custom nut.
Thanks again for all who responded.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell

On Tue, 6 Jan 2009 15:44:18 -0500 (EST) "Arnie Fero"
<fero_ah at city-net.com> writes:
> Just one word of caution...  If you order anything from MSC, make 
> DAMN certain that
> you know what the shipping & handling charge will be BEFORE you 
> submit your order.
> They are the WORST that I've ever dealt with.  Your little 9/32 x 24 
> tap might end
> up costing you $30 S&H!
> 
> See ya,  Arnie
>
____________________________________________________________
Get a degree in computer sciences.  Find a school near you.
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw1W3jgFAFwgYLFwQBuTcEwah2k3472jt6sn4r9pg3s8aRRuV/