[SEL] Thread question

[peter ogborne]

And the winner is Joe Pridle.......come on down Joe, congratulations!
----- Original Message ----- 
From: <rdhaskell at juno.com>
To: <sel at lists.stationary-engine.com>
Sent: Wednesday, January 07, 2009 1:36 AM
Subject: [SEL] Thread question


> I want to thank all who replied to my question, and will make one reply.
> Al Harris:  a 5/16 x 24 nut slips over the threads without touching.
> Peter O:  I am sure of the 24 tpi and other measurements, and it does
> have 5 magnets.  Peter F:  Thanks for the tables.  And I think the winner
> is:  Joe Prindle.  I will see if I can find that unusual tap locally, or
> order it.  Thanks to all again.
>
> On Tue, 6 Jan 2009 06:11:06 -0800 (PST) Joe Prindle
> <joe_prindle2001 at yahoo.com> writes:
>> The 48A is a VERY common Western Electric, and the thread for the
>> crank is 9/32 x 24, the tap is available from MSC, item #04840815.
>> Joe
>> Joe Prindle
> ____________________________________________________________
> Save on Domain Registration. Click Now!
> http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2XOfvx7B5zobj1sa9N2GgLMGOUBIQifUcAxbEjinr1jBMbT/
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>