[SEL] Petter AV2-M Rstore, Progress Report 4-A

[Jim O'Hagan]

Frank , please call me  415 892 0236. I might have a Plan "B" that has
ALWAYS worked for me. Jimmy

Jim O'Hagan
-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of frank skinner
Sent: Thursday, April 30, 2009 1:58 PM
To: AA_OLD ENGINE
Subject: Re: [SEL] Petter AV2-M Rstore, Progress Report 4-A


Jim;

There are independent cylinders, & valve in head , heads, the cylinders have
liners,

and unbolt from the block seperately, I cant get at the rod bolts properly
until I 

get the # 2 piston down part way, then i can remove all the rod cap nuts.

Then I can remove the cylinders from the base , remove the liners, then the
pistons.

At least, thats the plan.

 

                Regards

        Franklin S. Skinner 
    Marine Surveyor & Consultant 
3428 Talon Court Wilmington NC 28409 
       34'10.9 North 74'52.4 West 
PH 910-791-8870 Cell 910-612-7470



 
> From: jdohagan at comcast.net
> To: sel at lists.stationary-engine.com
> Date: Thu, 30 Apr 2009 13:13:43 -0700
> Subject: Re: [SEL] Petter AV2-M Rstore, Progress Report 4-A
> 
> Frank, Are the 2 cyl.s independent of each other or connected castings ?
> Can you get at one of the rod caps to remove it? Do the Cyl.s unbolt from
> the crank case? Does the cylinders have exhaust ports near the bottom ?
> Thanks Jimmy
> 
> Jim O'Hagan
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of frank
skinner
> Sent: Thursday, April 30, 2009 12:35 PM
> To: AA_OLD ENGINE
> Subject: Re: [SEL] Petter AV2-M Rstore, Progress Report 4-A
> 
> 
> Jim;
> 
> 
> 
> Here is a link to have a look.
> 
> 
> 
> http://www.oldengine.org/members/fskinner
> 
> Franklin S. Skinner 
> Marine Surveyor & Consultant 
> 3428 Talon Court Wilmington NC 28409 
> 34'10.9 North 74'52.4 West 
> PH 910-791-8870 Cell 910-612-7470
> 
> 
> 
> 
> > From: jdohagan at comcast.net
> > To: sel at lists.stationary-engine.com
> > Date: Thu, 30 Apr 2009 11:34:05 -0700
> > Subject: Re: [SEL] Petter AV2-M Rstore, Progress Report 4-A
> > 
> > Frank, are thee any pictures of the engine or a similar one available?
> > Thanks Jimmy O'Hagan,415 892 0236
> > 
> > Jim O'Hagan
> > -----Original Message-----
> > From: sel-bounces at lists.stationary-engine.com
> > [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of frank
> skinner
> > Sent: Thursday, April 30, 2009 1:03 AM
> > To: AA_OLD ENGINE
> > Cc: stationary-engine at oldengine.org
> > Subject: [SEL] Petter AV2-M Rstore, Progress Report 4-A
> > 
> > 
> > Well not a lot to report since my last post.
> > 
> > Pistons still VERY stuck, soaking in every thing you can think of.
> > 
> > { I havn't tried Scotch } gave it lotsa thought though ;-}
> > 
> > I'm awating a 5/8" BSF tap to make couplings for the head studs
> > 
> > to extend the length, then fit a 1" plate to accomidate a hydraulic
> > 
> > "Porta-Power" ram, to ease the piston down.
> > 
> > Once I can accomplish this I can remove the Cylinder blocks
> > 
> > then re-attack the pistons & liners, and finish the complete tear down.
> > 
> > 
> > 
> > Good news is I found a # 5 Bell housing for the engine that would 
> > 
> > allow coupling a genset up directly, BAD NEWS, its in Nottingham UK
> > 
> > I'm sure the post to get it here would be bloody expensive.
> > 
> > 
> > 
> > Back to finding another plan, I suppose.
> > 
> > 
> > 
> > 
> > 
> > Remember, "Rust Never Sleeps"
> > 
> > Franklin S. Skinner 
> > Marine Surveyor & Consultant 
> > 3428 Talon Court Wilmington NC 28409 
> > 34'10.9 North 74'52.4 West 
> > PH 910-791-8870 Cell 910-612-7470
> > 
> > 
> > 
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> > 
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel