[SEL] Schebler D part

[Orrin B Iseminger]

If you have an electric drill and bench grinder you can make your own.  

Punch a hole in a piece of thick leather disk, somewhat larger than what
you'll need.  Then, get a long bolt that is threaded its entire length, two
washers and a nut that fits the bolt.  Insert the bolt in the hole with
washers on both sides.  Snug up the whole "sandwich" with the nut.  

Chuck the bolt in an electric drill.  With the drill running, shape the disk
on a coarse bench grinder wheel, disk sander, belt sander, or whatever.  

It takes longer to tell about it than it does to do it.  

Best regards, 

Orrin

Orrin Iseminger
Colton, Washington, USA
http://users.moscow.com/oiseming/lc_ant_p/menu.htm
So many projects.  So little time.   

-----Original Message-----
From: stationary-engine-request at oldengine.org
[mailto:stationary-engine-request at oldengine.org] On Behalf Of
rdhaskell at juno.com
Sent: Monday, April 20, 2009 7:11 PM
To: sel at lists.stationary-engine.com; stationary-engine at oldengine.org
Subject: Schebler D part

Hi all. Where can I get a leather air valve disk for a Schebler D carb?
Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell
____________________________________________________________
Free quote and debt consolidation information.  Click Here.
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTIk3n8HXbW83zpEjpHo0iokLwO
tkQvfSGzl1kQOoNdYfP8mnXTc6M/

To UN-subscribe, send a message to:

stationary-engine-request at oldengine.org
with:
unsubscribe
in the subject of the message. Nothing else, no SIGs, etc.