[SEL] Help needed FM Jack of all Trades 9 H.P.

[Wayne Thackery]

Greetings Jimmy,

It appears that they all take the same size tag. I measure the holes on my
12 HP Electric and it measures the same as the others you have posted.

Cheers,
Wayne A Thackery
Keizer, Oregon

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jim O'Hagan
Sent: Tuesday, September 23, 2008 9:25 AM
To: 'The SEL email discussion list'
Subject: Re: [SEL] Help needed FM Jack of all Trades 9 H.P.

Hi Wayne, My 3 horse electric,4horse, and 6hp. All take a etched plate with
3.10 x5.080 mounting centers. Do the larger T's use that size or a bigger
plate? These are straight line measurements , not arched. Cya, Jimmy
O'Hagn,415 892 0236

Jim O'Hagan
-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Wayne Thackery
Sent: Tuesday, September 23, 2008 7:34 AM
To: 'The SEL email discussion list'
Subject: Re: [SEL] Help needed FM Jack of all Trades 9 H.P.

Greetings Jerry,

I have a 9 HP FM-T with a tag. It is a Special Electric but the tag should
be the same I believe. I will be out to the Museum this weekend and will try
and remember to take pictures for you if you would like. I also need a tag
like this and have been going to contact you. Hopefully we can get together
to make some of these. Let me know what you think.

Cheers,
Wayne A Thackery
Keizer, Oregon



-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jerry Evans
Sent: Tuesday, September 23, 2008 2:25 AM
To: sel at lists.stationary-engine.com
Subject: [SEL] Help needed FM Jack of all Trades 9 H.P.

Hi Guys,
         I need to reproduce a brass spec. plate for a Fairbanks Morse 
"Jack of all Trades" for a local collector but have no idea of what it 
looks like or size of it.

         Can anyone help with good clear pics and possibly size & hole 
centres please ?

         On the subject of spec plates, I've been catching up on artwork 
for the last few weeks and am starting to etch a new batch tomorrow and 
will be catching up on quite a few outstanding orders (yours as well Luke 
but not yours yet Elden).

         If there is anyone else who is waiting for a plate and I have not 
contacted you off list in the last few weeks please give me a reminder "off 
list".

         Many thanks

Keep the revs up (or down)
Jerry Evans
Near Johannesburg in Sunny South Africa.
Etched Brass Engine Plates made to order:
<www.oldengine.org/members/evans/plates/index.htm>



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel