[SEL] OT recoating silver on mirrors

[Elden DuRand]

Richard:

Ahhh, yes!  The big flathead 308 CI six cylinder.  The one with the "export kit", which included the aluminum high compression head, the hot cam and the dual carbs.  Head gaskets and valve guides are what I remember most about 'em.

Take care - Elden
http://www.oldengine.org/members/durand 

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of Richard
> Fink Sr
> Sent: Tuesday, September 23, 2008 09:03 AM
> To: The SEL email discussion list
> Subject: Re: [SEL] OT recoating silver on mirrors
> 
> 
> Curt your mention of the Hudson Wasp brought back 
> many memories. We 
> built a stock car back in the 60s with a jet or 
> wasp engine [one with 
> two carbs] was quite a runner. 8-)
> R Fink
> 
> 
> At 11:35 AM 9/22/2008 +0000, you wrote:
> >Hey guys sure could use some help on finding a 
> source to recoat the silver on
> >antique mirrors.  Has anybody done this 
> procedure or know of some one that
> >will? Trying to restore the rear view mirror in 
> my 52 Hudson Wasp.
> >thanks in advance,
> >Curt Andree
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >No virus found in this incoming message.
> >Checked by AVG.
> >Version: 8.0.169 / Virus Database: 270.7.0/1684 
> - Release Date: 
> >9/22/2008 6:39 AM
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel