[SEL] Old Hoffmann bearing

[Peter Lowe]

Hi Ron

As Bill said, you need an SKF - AMS-7 , this is an angular contact bearing - 
inch, or RHP - MJT 7/8
I.D = 0.8750" (7/8"), metric dimensions = 22.225mm
O.D = 2.25",  (2 1/4"),  metric dimensions = 57.150mm
Thickness = 0.6875" (11/16"),  metric dimensions = 17.46mm
Weight = 0.540 lbs,
There is no even metric equivalent for these.
I have an SKF equivalents book here that converts these bearing companies to 
SKF:
Echuca
Fafnir
FBC - FAG
Hyatt
MRC
ND
R&M
Timken
Torrington

Your 29/32" is out for the ID.

Regards
Peter, NSW, Oz



> Hi all
> I am restoring an old water pump and require a bearing which is a Hoffmann
> MS9ACD or equivalent.  It is approximately two and a quarter inches OD and
> 29/32 ID.  Any information would be appreciated.
>
> Thanks
> Ron