[SEL] Piston Rings and old engines.

[Best, George]

Wow!  I'm always impressed by how you tackle challenges and document
what you do.

One question.  If you didn't have an old ring to measure, how would you
determine the inside diameter for your new ring?

George

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of
curt at rustyiron.com
Sent: Thursday, October 02, 2008 11:08 AM
To: stationary-engine at oldengine.org; sel at lists.stationary-engine.com
Subject: [SEL] Piston Rings and old engines.

Guys, here is a page I put together on fun in the shop last night. The
weather is finally cooling off and I played on the lathe until about
10:30
last evening trying my hand at making piston rings for a couple of
friends
who need some for their hit and miss engines. Hope you enjoy.
Curt Holland
<http://www.oldengine.org/members/holland/images/MakingPistonRings/Thumb
nails.html>

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.