[SEL] Latest Mt. Wilson project

[Richard Strobel]

NICE lookin' engine Larry.  Friend Corky and I now have the big 6x10 FBM 
"Typoon" in the electrolysis soup.

If you happen to know of a spring supplier other than Century, sure would 
appreciate a heads-up as we have one broken.

btw, your chart sure comes in handy and many thanks again for sending it!!!

Regards,
RickinMt.
PS: Still lookin' fer the attachments that go on the H-beam car lift...gotta 
be out there somewhere.


----- Original Message ----- 
From: "Larry Evans" <lfevans at pacbell.net>
To: <sel at lists.stationary-engine.com>
Sent: Monday, May 19, 2008 1:10 PM
Subject: [SEL] Latest Mt. Wilson project


> Now that some of you are reminded of the big Fairbanks Morse engine at Mt.
> Wilson I thought you might be interested in seeing a few pictures of our
> most recent project there.  My brother Ken and I were asked to see if it
> was feasible to get a large old Deming triplex pump working again.  See:
> http://www.oldengine.org/members/levans/deming/index.htm
> for some pictures and explanation of the project.
>
> Thanks for all the kind words about the GEM article.
>
> Regards,
>
> Larry Evans
> MailTo:LFEVANS at pacbell.net
> http://www.oldengine.org/members/levans/
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>