[SEL] 208V motor

[William Olson]

Hello Richard,

Wednesday, January 23, 2008, 1:51:37 PM, you wrote:

RS> Andy..look again at the spec sheet as it says 1-phase...also click on the
RS> "wiring".  I don't see any reason why you can't hook an earth ground to the
RS> case of the motor.

RS> Good Luck,
RS> RickinMt.


RS> ----- Original Message ----- 
RS> From: "Andy Glines" <andyglines at hotmail.com>
RS> To: <sel at lists.stationary-engine.com>
RS> Sent: Wednesday, January 23, 2008 11:14 AM
RS> Subject: Re: [SEL] 208V motor



RS> _______________________________________________
RS> SEL mailing list
RS> SEL at lists.stationary-engine.com
RS> http://www.stationary-engine.com/mailman/listinfo/sel


  For everyone's safety sake, and legally, you must have a seperate
  earth ground the case of the motor when running from utility power.
-- 
Best regards,
 William, Master Electrician                           mailto:weolson at wiktel.com