[SEL] IHC BIG END BEARING

[SERVICE]

thanks Skip, i just have to find someone to do it, Chester.

----- Original Message ----- 
From: "Skip Landis" <skipl130 at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, January 10, 2008 9:20 AM
Subject: Re: [SEL] IHC BIG END BEARING


> chester, i brazed & remachined the one for my 10 horse famous. still 
> running.  skip
>
> SERVICE <edwards_service at westnet.com.au> wrote:  Hi, i am currently 
> restoring a 8hp famous, its all going well untill i came to the big end, i 
> was worried when i pulled it apart as it had no shims fitted, anyway it is 
> really worn, probaly about 1/16 or more, as this is a bronze? block 
> bearing, is there any fix?, could the bearings be welded up & milled out?, 
> any ideas & comments welcome.
> Cheers,
> Chester from West Aus.
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it 
> now.
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel