[SEL] Sticking lead to cast iron

svsuzanne at copper.net svsuzanne at copper.net
Tue Feb 26 07:04:58 PST 2008


An acid based flux is required.  The biggest problem might be getting the 
cast hot enough.  I would probably use 50/50.
----- Original Message ----- 
From: "Richard Strobel" <Richard_Strobel7 at msn.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, February 26, 2008 9:26 AM
Subject: [SEL] Sticking lead to cast iron


>
>  Howdy all;
>    Is there something special about getting lead to stick to cast 
> iron....like a flux of some sort?
>
>   I've removed the counterweights off a fairly large crank and the 
> mounting hardware was "leaded in."
>
>  Thanks much!!
>
>  RickinMt.
>
>  PS: The counterweights had to be removed in order to fit in the Crank 
> Doc's machine where the rod throw will be cleaned up.
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 
> 269.20.9/1291 - Release Date: 2/21/2008 11:05 AM
> 




More information about the sel mailing list