[SEL] Need 3/4 HP 3-Phase Motor

[Paul Maples]

Lew I probably have a single phase 3/4 or 1 HP I could swap you for it, I 
will have to check out my motor stock. If the motor is a 3/4 HP on your 
Logan please send me a picture of it if you can as I need to see where the 
wiring box is located on the motor if it has one, need to know the shaft 
size, and frame configuration.

Paul

----- Original Message ----- 
From: "Lew Best" <bee_keeper at earthlink.net>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Wednesday, February 06, 2008 8:15 PM
Subject: Re: [SEL] Need 3/4 HP 3-Phase Motor


> Hey Paul
>
> I'll look at mine on my Logan 10"; does that sound like it might fit?
> I'd prefer a single phase; was not on my priority list to swap it out
> but if I have a market for the 3ph motor........
>
> Lew Best near Waco, TX
>
> -----Original Message-----
>
> Folks I am looking for a 3/4 HP 3 Phase motor for my lathe, it needs to
> have a 56 frame. Does anyone have one they want to get rid of?
>
> Thanks,
>
> Paul
>
>