[SEL] O.T. Please identify this "lamp"

Bill Brueck b2 at chooka.net
Wed Sep 19 12:10:13 PDT 2007


Neat site!  I wish I spoke more French, but can make out most of what it
says.

Great reference site, thanks for finding and posting about it.

B²

Bill Brueck
   Chatfield, Minnesota, USA

Confusion is a higher state of knowledge than ignorance.
 

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Peter Scales
Sent: Wednesday, September 19, 2007 11:36 AM
To: 'The SEL email discussion list'
Subject: Re: [SEL] O.T. Please identify this "lamp"

Jerry

Please take a look at this site - http://www.acethylene.com/

I think what you have there is an Arras lamp....  The giveaway for me is the
"flower" shape on the top of the needle valve stem.  The website I mention
has this to say: "Le pointeau est une partie fragile qui peut se casser
facilement. Il est composé d'une tige de laiton de 4 mm sur laquelle est
soudé un robinet (vissé et/ou soudé) en  une forme de fleur (sur la plupart
des Arras)" which roughly translates as "The needle is a fragile part which
can break easily.  It is composed of a 4mm brass shaft on which is soldered
a tap (screwed and/or soldered) in the form of a flower (on most Arras)".
Also, the hook part of the screwed closure very much resembles the Arras
lamps described.

Regards

     Pete
--
Peter Scales  

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jerry 
> Evans
> Sent: 18 September 2007 18:14
> To: sel at lists.stationary-engine.com
> Subject: [SEL] O.T. Please identify this "lamp"
> 
> Hi Everyone,
>          I came across this "lamp" and am hoping someone can tell me 
> more about it?
> 
>          Although it is not an engine part (which makes it "off 
> Topic") , if it is an illuminating lamp it could be argued that this 
> could have been used to find your way out to the engine room on a dark 
> night when the lighting plant / generator had stopped and then it 
> would be engine related and therefore "On Topic". <Big Grin>
> 
>          Thanks for looking:
> <www.oldengine.org/members/evans/lamp/index.htm>
> 
> 
> Keep the revs up (or down)
> Jerry Evans
> Near Johannesburg in Sunny South Africa.
> Etched Brass Engine Plates made to order:
> See:
> www.oldengine.org/members/evans/plates/index.htm
> or learn how to finish off your plates 
> www.oldengine.org/members/evans/plates/finish.htm
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel







More information about the sel mailing list