[SEL] Benchtop Mills
Judge Tommy Turner
lcjudge at scrtc.com
Fri Sep 7 16:23:06 PDT 2007
Paul,
They are fine for light work and as long as you're not going to try
to use them to mill out a 4 inch hole or some similar heavy work, they
can do a lot along the lines of old engine repairs. If you decide you
are going to get one, contact me. I have one that is new (less than an
hour work done on it) that I've never used (a friend who moved traded it
to me).
Tommy Turner
Magnolia, Ky
Paul Maples wrote:
>Has anyone had any experience with the benchtop vertical mills? I need a mill and was wondering what the gang would recommend. I am just going to use it for engine work and that is about all. Let me know what you recommend.
>
>Paul
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
>
More information about the sel
mailing list