[SEL] Stickney Engines

[Judge Tommy Turner]

Denis,
    My 1 1/2 HP Stickney is gray, with some original paint still 
showing.  The Stickney Jr.I've got was red and it still has some 
original paint on it as well.  I had a 3 HP here that was grey and a 7 
that was blue.  I had an Ont. Wind Engine and Pump Co. Stickney that I 
got in Canada that was red.

Tommy Turner
Magnolia, KY




Denis Rouleau wrote:

>Hi Steve, I was not able to find out the reason why about 10% of Stickney engines
>were sold in another color than the usual dark blue. Seems that some of the red
>Stickneys have the "OWE&PCo." name plate but not all. I've also seen a few
>Stickneys with original grey paint and even a couple of them with original green
>paint. What is the serial number on your engine and is it gravity or fuel pump feed?
>Denis Rouleau
>
>HI Dennis, Thanks for all the Stickney info. I had gone to the computer just now to ask for help on mine. I started stripping the bad paint job off my 3 hp and underneath I found what I thought might be the original paint but it was red and I'd only seen blue Stickneys. Now looking at your pictures there are several red ones there. What is the story on red vs blue stickneys? I'm going to leave mine original red if that is really a stickney color. Thanks Steve> From: buzzcoil2 at videotron.ca>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>  
>