[SEL] Gasket material for oilers?

[Glenn Karch]

Paul,

1/8" is too thick for oilers.  The gaskets have to be thin for the oiler to 
be assembled right  so the drip adjustment works OK.  About 1/32 is enough. 
You can get them from Starbolt or Hit & Miss all the right size and ready to 
use.

Glenn Karch
Hercules Historian
Haubstadt, Indiana, USA
----- Original Message ----- 
From: "Paul Maples" <paulmaples at sbcglobal.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, May 01, 2007 8:38 PM
Subject: [SEL] Gasket material for oilers?


> Hey Gang what is the best gasket material to use for the oiler glasses?
>
> A friend of mine suggested 1/8" neoprene but I am afraid I will not be 
> able to find this in my small town, what are some other suggestions?
>
> Paul
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel