[SEL] Starting Stover - Need Help

[Germoamer at aol.com]

In a message dated 4/30/2007 10:11:33 PM Eastern Daylight Time, 
rex002 at centurytel.net writes:

I always thought about 4 degrees BDC am I correct ?

 
Starting with a buzz coil, not going to pull any load, keep from kicking back 
on you, any where from a few degrees before to a few degrees after TDC should 
be fine
 
 
Tom Schmutz
Concord, Va.
Germoamer at aol.com



************************************** See what's free at http://www.aol.com.