[SEL] Hercules flywheel key removal.

[Paul Maples]

Bill while you work out a method for removing it start pouring the 
penetrating oil like Gibbs, Kroil, PB Blaster, etc., onto the key to start 
loosing up the rust.

Paul

----- Original Message ----- 
From: <BillMil357 at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Saturday, June 30, 2007 9:27 PM
Subject: Re: [SEL] Hercules flywheel key removal.


> Hey Glen and Paul,
>
> Glen was that style flywheel's mainly used on the older 1 1/2 HP  engines.
>
> Paul, I do have a welder but I am not that good at welding, but I have a
> young man two doors down the street that is a good welder, that has been 
> known
> to do some welding for me LOL.
>
> Thanks,
>
> Bill Miller.
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel