[SEL] EDM

[brent.tamatea]

That sounds really interesting had never heard of that process quite
amazing..thanks brent 

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Frank DeWitt
Sent: Thursday, 28 June 2007 2:40 p.m.
To: sel at lists.stationary-engine.com
Subject: [SEL] EDM

Both wire EDM and electrode EDM are used extensively to make molds 
for injection molded plastic parts.  They can make parts that could 
not be machined.  Take a good look at your cell phone for a good 
example of what comes out of EDM molds.

I design for EDM when I have to. I actually try to design for 
conventional machining as the mold will cost less.

Frank


Joe,
     When I was getting my undergraduate degree in engineering we used an
EDM to fabricate parts and I remember the name as you state "Electric
Discharge Machine".   I think we used carbon electrodes to do such
things as burn square holes in steel plates and other items.  While I've
never used one, the wire machines they have now are a trick as I've seen
gears and intricate items cut with them that are as good as machined items.

Tommy Turner
Magnolia, KY


 
+-------------------------------------------------------------------------+
HONOR GOD
SERVE PEOPLE
DEVELOP EXCELLENCE
GROW PROFITABLE
FOLLOWING BIBLICAL PRINCIPLES

    Frank DeWitt              |  mailto:frank at lbpinc.com
    Mechanical Design      |  Phone:  585 624 3052
    LBP  INC.                   |  Fax     585 624 1038
    2365 Cox Rd.              |     N 42.9130  W 
77.5164|
    Bloomfield NY 14469   |Web  http://www.lbpinc.com/