[SEL] Welding

brent.tamatea brent.tamatea at clear.net.nz
Sun Jun 3 19:45:05 PDT 2007


Ed looks like a worthwhile book thanks brent  

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Ed Herreid
Sent: Monday, 4 June 2007 2:29 p.m.
To: sel at lists.stationary-engine.com
Subject: Re: [SEL] Welding

Reg and all,

I bought a good welding book years ago.  Written in plain english and not a 
lot of charts and formulas, just a lot of welding tricks.  It is still 
available.  I found lots of tricks and shortcuts I would never have learned 
otherwise.  Check it out.  The table of contents is online at the adress 
below.

http://www.network6000.com/

Ed Herreid

----Original Message Follows----
From: "R & M Ingold" <randmingold at hotkey.net.au>
Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Subject: Re: [SEL] The Dying Maytag (Part 1 of 4)
Date: Sat, 2 Jun 2007 18:27:55 +1000

Hi Brent.
I get similar results with stick welding using Graphite and even carbon elec
brushes on small stuff. I really wish the tricks used by welders over the
years were recorded for our use. A lot of good info has been lost to us.
Reg & Marg Ingold.
Newcastle, NSW, Australia.
randmingold at hotkey.net.au
http://www.oldengine.org/members/randmingold

_________________________________________________________________
Make every IM count. Download Messenger and join the im Initiative now. 
Its free. http://im.live.com/messenger/im/home/?source=TAGHM_June07






More information about the sel mailing list