[SEL] Spoked Flywheels & Crankshaft

[Jim Dragoset]

Elden,
16-3/4" Diameter, 1-3/4" Wide, 1/2" Key, 1-3/8" Shaft Diameter,  5/8" Pinch
Bolt,
Six Straight Spokes with Three machined flat and drilled.
The crank is bent at the gear end, likely into the web.
Location is New Orleans but I do work in Wood River, IL several times a year
and drive up.
Jim

-----Original Message-----
From: Elden DuRand [mailto:edurand at mchsi.com]
Sent: Monday, July 30, 2007 11:59 AM
To: The SEL email discussion list
Subject: Re: [SEL] Spoked Flywheels & Crankshaft


Diameter?  Width?

Could be ZC series Fairbanks-Morse.  If they're the heavy ZC52 wheels, I
could be interested if the price is right (and not located on the moon!).

Take care - Elden
edurand at mchsi.com
http://www.oldengine.org/members/durand

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of Jim
> Dragoset
> Sent: Monday, July 30, 2007 08:58 AM
> To: SEL at lists.stationary-engine.com
> Subject: [SEL] Spoked Flywheels & Crankshaft
>
>
> Someone just dropped off a pair of spoked
> flywheels on a crankshaft.
> Cast into each flywheel is "ZAC13F5".
> Any ideas?
> Jim Dragoset
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel