[SEL] Propane Torch

[Glenn Wilson]

Is map hotter?
Why doesn't it go out when you tip it on its side?
Glenn

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Tim
Christoff
Sent: Friday, January 26, 2007 10:43 PM
To: The SEL email discussion list
Subject: RE: [SEL] Propane Torch


You can get a map gas torch for about $20 at many of the different home
builder type stores.  You can lay them on their side and they won't go out.
They will heat up copper for soldering in less than 30 sec's, Iv'e also
used one for silver solder with good results.

Tim Christoff
Basehor Kansas


> [Original Message]
> From: Glenn Wilson <wilson at stny.rr.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com>
> Date: 1/26/2007 8:15:21 PM
> Subject: [SEL] Propane Torch
>
> Who amoungst us knows about propane torches?
> I want to purchase another one for soldering pipes and/or "brazing
aluminum"
> with that funny rod.
> I have only had the cheepie ones that blow out if you tilt them.
> Thanks, Glenn
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.410 / Virus Database: 268.17.12/653 - Release Date: 1/26/2007


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel