[SEL] Riveting

[Richard Strobel]

and an assortment of Cleco's sure don't hurt either..see 110081561079  on 
that other site.

Kit also available from McMaster, Paul.

Good Luck,
RickinMt.


----- Original Message ----- 
From: "Keith Kinney" <kkinney at herculesengines.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, January 25, 2007 9:18 PM
Subject: Re: [SEL] Riveting


> Here's what you need Paul:
> http://cgi.ebay.com/10-PC-TINNERS-FORGED-STEEL-RIVET-SET-BLACKSMITH-ANVIL_W0QQitemZ170073319766QQihZ007QQcategoryZ13869QQrdZ1QQcmdZViewItem?hash=item170073319766
>
> Keith
>
>
>
> At 09:18 PM 1/25/2007, you wrote:
> >Hi Dave
> >A head forming tool, hang on and I will go out to my shed, take a
> >photo and make a web page. 1/2 hour
> >
> >Peter, Oz
> >
> >>
> >>>. Do you just go by feel and sight or do you have a head forming tool.
> >>>Paul
> >>
> >>Even I am NOT going to touch that one!
> >>         Dave
> >>PS, Hi Marion!
> >>_______________________________________________
> >>SEL mailing list
> >>SEL at lists.stationary-engine.com
> >>http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >
> >--
> >No virus found in this incoming message.
> >Checked by AVG Free Edition.
> >Version: 7.5.432 / Virus Database: 268.17.10/651 - Release Date:
> >1/24/2007 6:48 PM
>
> Keith Kinney
> Evansville, Indiana  USA
> www.HerculesEngines.com
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>