[SEL] Need Advice on Cast Part Repair

[R and E Freeman]

Paul you could take it to a shop with a puffer torch and build it back up
with cast iron for a mickey mouse job. Building it up with bronze is easy as
well. Both methods are risk free. The nickel rod would be OK to but you may
get a little porosity depending on what the base cast is like
Ray Freeman
Perth WA

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of
jbcast at charter.net
Sent: Friday, 5 January 2007 1:17 PM
To: The SEL email discussion list
Subject: Re: [SEL] Need Advice on Cast Part Repair

Paul, I would either leave it alone or take a file and reshape it a little,
doesn't seem to be enough wear to cause a problem.
J.B. Castagnos
Belle Rose, LA
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel